10.05.2020

Job description of the driver of the gas distribution station. Functional duties of the operator of the gas filling station Operator of the gas filling station duties


Send your good work in the knowledge base is simple. Use the form below

Students, graduate students, young scientists who use the knowledge base in their studies and work will be very grateful to you.

Posted on http://www.allbest.ru/

Introduction

Operatorgas station-workerfilling stationstations responsible for customer service and refueling Vehicle sold fuel materials. As a rule, for successful work in this position, necessary condition is the presence of a crust gas station operator.

RequirementsAndresponsibilities

The petrol station operator must know:

The basics of working with filling equipment;

rules of electrical safety when working with electrical installations;

Rules for working with fuel lubricants;

General norms of labor protection and fire safety.

In addition, the gas station operator must be able to serve customers at cash register and bank terminal, as well as be able to use the available at gas stations cleaning systems and mechanisms.

The level of qualification of the gas station operator is reflected by the category assigned to him. Today car operators filling stations are assigned ranks from 2nd to 5th:

The operator of the gas station, having the 2nd category, can perform a minimum list of work, must know the rules technological process and pass an introductory briefing on fire safety and labor protection;

3rd category - in addition to the theoretical base, it provides for the skills to work with radiators, maintenance of the equipment used and maintenance of material reporting documentation;

· 4th category - assigned to employees who have work experience in the 3rd category for at least a year. These specialists are allowed to service pipelines and tanks;

· 5th category - can be assigned after a year of work on the 4th category. This category of filling station operators is allowed to work with automated systems for the issuance of petroleum products and their maintenance.

Operatorfilling stationsstations2nddischargeThis- refueling with fuels and lubricants: gasoline, kerosene, oil, etc. cars, motor vehicles, tractors, all kinds of installations, ships and other vehicles manually and with the help of fuel dispensers. Issuance of these materials to vehicle drivers. Tire pressure check. Release of oil products packaged in small containers. Sale of spare parts. Reception of oil products and lubricants. Sampling for laboratory analysis. Preparation of documents for accepted and sold products. Preparation of a shift report. Shall know: the principle of operation of serviced filling equipment; purpose and external differences of oil products; names, marks and grades of the released oil products; name and conditions for the use of control and measuring instruments; rules for drawing up documentation for accepted and sold petroleum products; rules for storage and distribution of petroleum products . 3rddischarge Characteristics of works. Refueling with fuels and lubricants: gasoline, kerosene, oil, etc. cars, motorcycles, tractors, aircraft, ships and other vehicles using mechanical and semi-automatic refueling equipment. Aircraft refueling using mobile refueling equipment with a capacity of up to 500 l/min. Adding water to the radiators and filling the battery fluid. Submission of applications for the repair of equipment and its acceptance from repair. Submission of applications for the delivery of petroleum products to filling points. Maintaining material and reporting documentation. Timing control state audit measuring equipment and devices. Troubleshooting, cleaning and lubrication of serviced equipment . Mustknow: arrangement of serviced filling equipment, instrumentation; physical and chemical properties of petroleum products; name, brands and grades of all petroleum products used for refueling vehicles in winter and summer; the procedure for processing applications and material and reporting documentation; terms of the state check of the measuring equipment and devices.

4thdischarge Characteristics of works. Refueling with fuels and lubricants: gasoline, kerosene, oil, etc. motor vehicles, motor vehicles, tractors, aircraft, ships and other vehicles with the help of automatic and mechanical means of refueling with remote control. Aircraft refueling using mobile refueling equipment with a capacity of over 500 l/min. Checking the serviceability of fuel and oil dispensing equipment, control automation and electrical distribution boards. Control over the timing of submission for inspection of fuel dispensers and measuring devices to state verification officers. Submission of applications for the repair of equipment and its acceptance from repair. Connecting a mobile filling station to power sources; bringing into operation a gasoline-electric unit with an internal combustion engine, a generator and an electrical control panel. Elimination of minor malfunctions in the automatic remote control of refueling facilities. Must know: the rules for the operation of tanks, process pipelines, fuel dispensing equipment and electronic automatic system management; schemes of fuel and oil systems of aircraft; arrangement and rules for the operation of stationary systems for centralized refueling of aircraft with fuel; rules for conducting operational - airfield quality control of aviation fuels and lubricants for the content of water and mechanical impurities using automatic and chemical methods; rules technical operation equipment of a mobile filling station (NPP) with a starting gasoline-electric unit and an internal combustion engine and an electrical panel; the procedure for installing a mobile nuclear power plant at the workplace and connecting the power supply; the procedure for preparing and starting an internal combustion engine. 5thdischarge Characteristics of works. Service automated system refueling with fuel and lubricants by credit cards with electronic device input and display of information, hardware unit and puncher. Checking the accuracy and control over the delivery of fuel by a filling station. Control over the correctness of information on the scoreboard, indicator lamps of the input device and recording on punched tape. Removal of punched tape with information, replacement of cassettes, recording in the memory block. Adjustment of serviced equipment in the process of work, participation in the repair and replacement of faulty parts and components of the system. Shall know: design and operating rules of an automated system for dispensing petroleum products using credit cards; basic methods of preparing and entering information into a memory block; rules for checking for accuracy and adjusting system nodes; the sequence of conducting the process of refueling vehicles using credit cards; instructions on the procedure for the issue and payment of petroleum products by credit cards.

Are commonprovisions

1.1. The position "Operator of filling stations of the 2nd category" belongs to the category "Workers".

1.2. Qualifications- complete general secondary education and professional training in production, no work experience requirements.

1.3. Knows and applies:

Names, brands and grades of the released oil products;

Rules for the preparation of documentation for petroleum products that are accepted and sold;

Rules for the storage and release of petroleum products

1.4. Appointed to the position and dismissed by order of the organization (enterprise / institution).

1.5. Reports directly

1.6. Leads the work

1.7. During the absence, he is replaced by a duly appointed person who acquires the appropriate rights and is responsible for the proper performance of the duties assigned to him.

2. Job Responsibilities

JOB INSTRUCTIONS FOR THE OPERATOR OF FUEL STATIONS OF THE 2nd DISTRIBUTION

This job description has been developed and approved on the basis of employment contract with the operator of gas stations of the 5th category and in accordance with the provisions Labor Code Russian Federation, List of industries, workshops, professions and positions with harmful conditions labor, work in which gives the right to additional leave and a reduced working day, approved by the Decree of the USSR State Committee for Labor and the Presidium of the All-Union Central Council of Trade Unions of October 25, 1974 N 298 / P-22; Model industry norms for the free issue of special clothing, special footwear and other personal protective equipment to employees, approved. Decree of the Ministry of Labor of the Russian Federation of December 16, 1997 N 63; Standard norms for the free issuance of certified special clothing, special footwear and other personal protective equipment to employees employed in work with harmful and (or) dangerous working conditions, as well as in work performed in special temperature conditions or associated with pollution, in organizations of the oil and gas complex, approved order of the Ministry of Health and social development RF dated July 6, 2005 N 443; Regulations on the payment of additional expenses for medical, social and professional rehabilitation of insured persons who have received damage to their health due to accidents at work and occupational diseases, approved by Decree of the Government of the Russian Federation of May 15, 2006 N 286 and other regulatory legal acts regulating labor relations.

Are common provisions

1.1. The operator of gas stations of the 2nd category belongs to the category of workers and is directly subordinate to

Labor protection rules;

Requirements for the quality of work (services) performed, for the rational organization of labor in the workplace;

Types of marriage and ways to prevent and eliminate it;

Industrial alarm;

Arrangement of serviced filling equipment, instrumentation;

The principle of operation of serviced filling equipment;

Rules for the operation of tanks, process pipelines, fuel dispensing equipment and electronic-automatic control system;

Schemes of fuel and oil systems of aircraft;

Arrangement and rules for the operation of stationary systems for centralized refueling of aircraft with fuel;

Design and operating rules of an automated system for dispensing petroleum products using credit cards;

Rules for conducting operational-aerodrome quality control of aviation fuels and lubricants for the content of water and mechanical impurities using automatic and chemical methods;

Rules for the technical operation of the equipment of a mobile gas station (NPP) with a starting gasoline-electric unit and an internal combustion engine and an electrical panel;

The procedure for installing a mobile nuclear power plant at the workplace and connecting the power supply;

The procedure for preparing and starting an internal combustion engine;

Physical and chemical properties of petroleum products;

Purpose and external differences of oil products;

Names, brands and grades of petroleum products sold, used for refueling vehicles in winter and summer;

Name and conditions for the use of instrumentation;

Rules for the preparation of documentation for accepted and sold petroleum products;

The procedure for processing applications and material and reporting documentation;

Rules for the storage and release of petroleum products;

Terms of the state check of the measuring equipment and devices;

Basic methods of preparing and entering information into a memory block;

Rules for checking for accuracy and adjustment of system nodes;

The sequence of conducting the process of refueling vehicles using credit cards;

Instructions on the procedure for the release and payment of petroleum products by credit cards.

official responsibilities

The operator of filling stations of the 2nd category performs the following types of work:

2.1. Refueling with fuels and lubricants: gasoline, kerosene, oil, etc. cars, motorcycles, tractors, all kinds of installations, aircraft, ships and other vehicles manually, using fuel dispensers, mechanical and automatic refueling equipment with remote control.

2.2. Aircraft refueling using mobile refueling equipment with a capacity of 500 l / min and above.

2.3. Issuance of these materials to vehicle drivers.

2.4. Tire pressure check.

2.5. Checking the serviceability of fuel and oil dispensing equipment, control automation and electrical distribution boards.

2.6. Control over the timing of submission for inspection of fuel dispensers and measuring devices to state verification officers.

2.7. Release of oil products packaged in small containers.

2.8. Sale of spare parts.

2.9. Adding water to the radiators and filling the battery fluid.

2.10. Troubleshooting, cleaning and lubrication of serviced equipment.

2.11. Reception of oil products and lubricants.

2.12. Sampling for laboratory analysis.

2.13. Registration of documents for accepted and sold products.

2.14. Preparation of a shift report.

2.15. Maintenance of material and reporting documentation.

2.16. Submission of applications for the repair of equipment and its acceptance from repair.

2.17. Submission of applications for the delivery of petroleum products to filling points.

2.18. Control of terms of the state check of the measuring equipment and devices.

2.19. Connecting a mobile filling station to power sources.

2.20. Bringing into working condition a gasoline-electric unit with an internal combustion engine, a generator and an electrical control panel.

2.21. Elimination of minor malfunctions in the automatic remote control of refueling facilities.

2.22. Maintenance of an automated system for refueling fuels and lubricants using credit cards with an electronic input and display device for information, a hardware unit and a perforator. 2.23. Checking the accuracy and control over the delivery of fuel by a filling station.

2.24. Control over the correctness of information on the scoreboard, indicator lamps of the input device and recording on punched tape.

2.25. Removal of punched tape with information, replacement of cassettes, recording in the memory block.

2.26. Adjustment of serviced equipment in the process of work, participation in the repair and replacement of faulty parts and components of the system.

Functionalresponsibilities

The operator of filling stations of the 2nd category performs the following labor functions:

2.1. Refueling with fuels and lubricants: gasoline, kerosene, oil for cars, motor vehicles, tractors, all kinds of installations, ships and other vehicles manually and using fuel dispensers.

2.2. Issuance of these materials to vehicle drivers.

2.3. Tire pressure check.

2.4. Release of oil products packaged in small containers.

2.5. Sale of spare parts.

2.6. Reception of oil products and lubricants.

2.7. Sampling for laboratory analysis.

2.8. Registration of documents for accepted and sold products.

2.9. Preparation of a shift report.

When need-to-know the operator of gas stations of the 2nd category may be involved in the performance of his duties overtime, in the manner prescribed by law.

Rights

The operator of filling stations of the 2nd category has the right:

3.1. For all social guarantees provided for by law.

3.2. Require the management of the enterprise to provide assistance in the performance of their professional duties and the exercise of rights.

3.3. Require the creation of conditions for the performance of professional duties, including the provision of necessary equipment, inventory, workplace that meets sanitary and hygienic rules and regulations, etc.

3.4. To receive special clothing, special footwear and other personal protective equipment.

3.5. For extra leave.

3.6. To pay additional expenses for medical, social and professional rehabilitation in cases of damage to health due to an accident at work and occupational disease.

3.7. Get acquainted with the draft decisions of the management of the enterprise relating to its activities.

3.8. Submit proposals for the management of the enterprise to improve the organization and improve the methods of work performed by it.

3.9. Request personally or on behalf of the immediate supervisor documents, materials, tools, etc. necessary for the performance of their duties.

3.10. Improve your professional qualifications.

3.11. Other rights provided by labor legislation.

Responsibility

3. Safety

1. ABOUTgeneralprovisions

1.12. The speed of traffic on the territory of the gas station should not exceed 5 km / h. Transport over underground tanks is not allowed. gas station operator instruction

2. Requirementsprotectionlaborbeforestartwork

2.1. Put on the overalls provided for by the relevant standards, check the personal protective equipment.

2.2. Check serviceability technological equipment and availability of fire fighting equipment.

3. Requirementsprotectionlaborintimework

3.1. Before draining oil products into the tanks of the gas station, install the road train in the direction of the vehicle; for him, it is necessary to ensure free exit from the territory of the gas station in case of an emergency.

3.2. Before starting to drain oil products, it is necessary: ​​to make sure that the tank and its equipment, process pipelines are in good condition and that the shut-off valves are switched correctly; make sure that the drain device of the tank truck is in good condition; stop refueling vehicles from the tank until the oil product is drained into it from the tank.

3.3. During the discharge of oil products, vehicles are not allowed to move at a distance of less than 8 meters from the drain devices of the gas station tanks.

3.4. Drainage of oil products into underground and ground tanks of filling stations must be sealed. Drainage by a falling jet is not allowed. Draining should be carried out with the engine of the tank truck not running after it has been grounded. Attach the grounding conductor first to the tank body, and then to the grounding device. Each tank car of the road train must be grounded separately until the oil product is completely drained from it. Remove grounding after disconnecting the hoses from the drain devices of the tanks, first from the grounding device, and then from the tank body.

3.5. It is necessary to open and close covers of hatches and wells of tanks smoothly, without impacts, in order to avoid sparking.

3.6. Employees who open the hatches of automobile tanks, wells and reservoirs or fill dispensing sleeves into them should be on the windward side to avoid inhalation of oil vapors.

3.7. The process of draining oil products into the gas station tank from a tank truck is carried out in the presence of the gas station operator and the tank truck driver. If a leak of oil products is detected, the drain must be stopped immediately.

3.8. When refueling vehicles at gas stations, observe following rules: the distance between the car standing under the gas station and the one following it must be at least 3 m, and between subsequent cars in the queue, at least 1 m; motorcycles, scooters and mopeds must be moved to and from fuel dispensers and mixers at a distance of at least 15 m manually with the engines turned off; all refueling operations must be carried out in the presence of the driver and with the engine turned off. It is allowed to refuel vehicles with a running engine only at low temperatures, when starting a stopped engine can be difficult; the surfaces of vehicles doused with oil products must be wiped dry before starting the engine. Oil products spilled on the ground must be covered with sand. The impregnated and used cleaning material is collected in metal boxes with closing lids and removed from the territory of the gas station to specially designated places; it is not allowed to refuel cars (except cars) with passengers.

3.9. Refueling of vehicles with combustible or explosive goods should be carried out at a site specially equipped for this purpose, located at a distance of at least 25 m from the territory of the gas station.

3.10. Samples of petroleum products should be stored in a special metal cabinet outside the gas station operator building.

3.11. It is not allowed to drain oil products into tanks, measure the level, take samples of oil products and refuel vehicles at gas stations during a thunderstorm.

3.12. On the territory of the gas station it is not allowed: to smoke and use open fire; perform any work not related to the reception, storage and release of petroleum products; store flammable liquids indoors; wash hands, wash clothes and wipe floors with flammable liquids; in the bottling areas to be present to unauthorized persons not associated with refueling or unloading of petroleum products; refuel vehicles whose drivers are in a state of intoxication; release gasoline into polyethylene canisters and glass containers; use temporary electrical wiring, electric stoves, reflectors and other electrical appliances with open heating elements in the gas station premises.

4. RequirementsprotectionlaborVemergencysituations

4.1. An emergency at a gas station should be considered: a fire at a gas station; malfunction in electrical equipment; leakage of oil products from the fuel dispenser, tank; gas contamination (over 100 mg/cu. m) in the filling station building; spillage and overflow when receiving oil products.

4.2. In all emergency situations you should immediately turn off the general switch and stop refueling cars.

4.3. In the event of a fire, it is necessary to call the fire brigade, start extinguishing the fire with the available means, involving transport drivers to help, inform the tank farm dispatcher.

4.4. It is not allowed to repair electrical equipment. In the event of a malfunction of the electrical equipment, an electrician should be called.

4.5. Turn off the fuel dispenser when an oil product leak is detected from it, call specialists for repairs. If an oil leak is detected in the tank, call emergency service, vacate the territory of the gas station from cars, inform the management of the organization, make an entry in the log of the acceptance and delivery of the shift.

4.6. In case of detection of gas contamination in the building of the gas station, it is necessary to ventilate the building with natural ventilation (open doors, windows), determine the source of increased gas contamination, inform the management of the organization, make an entry in the shift acceptance and delivery log.

4.7. In the event of a spill (overflow) of oil products, stop all technological operations, clear the territory of the gas station from vehicles, remove the spilled oil product, cover the spill with sand. If it is impossible to eliminate the emergency on your own, inform the management of the organization and call the emergency service.

5. RequirementsprotectionlaborBygraduationwork

5.1. Take off your clothes and put them in the closet. Protective clothing and special footwear should be stored separately from personal clothing.

5.2. Before washing, overalls should be aired in the open air for at least two hours. Repair of overalls to be made only after its washing. 5.3. Don't leave workplace unattended until the next shift arrives.

Conclusion

Operator filling stations stations 2nd discharge This - refueling combustible And lubricating materials: gasoline kerosene oil painting And etc. cars, motor transport, tractors, all kinds installations, courts And others transport funds manually And With help fuel - handouts columns. Vacation these materials drivers transport funds. Examination pressure air V tires. Vacation oil products, packaged V petty container. Sale spare parts. Reception oil products And lubricating materials. Selection samples For holding laboratory analyses. Decor documents on accepted And implemented products. Drafting report behind shift. Must know: principle work serviced filling station equipment; appointment And external differences oil products; names, stamps And varieties released oil products; Name And conditions applications control - measuring appliances; rules design documentation on accepted And implemented .

Are common provisions

1.1. The operator of gas stations of the 2nd category belongs to the category of workers and is directly subordinate.

1.2. A person with special skills is accepted for the position of operator of gas stations of the 2nd category, without presenting requirements for work experience.

1.3. The operator of gas stations of the 2nd category is accepted and dismissed from work by order

1.4. The operator of filling stations of the 2nd category must know:

Labor protection rules;

Rules for industrial sanitation and fire safety;

Rules for the use of personal protective equipment;

- requirements, presented To quality performed works (services), To rational organizations labor on working place; Responsibility

The operator of filling stations of the 2nd category is responsible for:

4.1. For failure to perform or improper performance of their official duties provided for by this job description - to the extent determined by the current labor legislation of the Russian Federation.

4.2. For causing material damage employer - within the limits determined by the current labor and civil legislation of the Russian Federation.

4.3. For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal, civil legislation of the Russian Federation.

1.1. This Instruction provides for the basic requirements for labor protection for operators of stationary, mobile and container filling stations (hereinafter referred to as gas stations).

1.2. Persons who have reached the age of 18, who have completed training, internships at the workplace, knowledge testing and instruction in labor protection, safety and fire safety, are allowed to service filling stations. Refresher briefing for gas station employees is carried out at least once a quarter, for specialists - at least once every six months.

1.3. All gas station employees must undergo a preliminary medical examination upon employment and periodic medical examinations in progress.

1.4. Filling station workers may be exposed to harmful and dangerous production factors: poisoning, injuries, burns, etc.

1.5. To perform their functions, gas station operators are provided with overalls, footwear and personal protective equipment in accordance with applicable standards and, if necessary, with special devices.

1.6. The territory of the gas station at night must be illuminated. Special attention it is necessary to pay attention to the lighting of places for refueling cars and draining oil products into the tanks of gas stations.

1.7. For local lighting when inspecting tanks, wells (cellars) and dispensers, use explosion-proof rechargeable lights with a voltage of not more than 12 V, which should be turned on and off outside the wells and at a distance of more than 3 m from the dispensers.

1.8. Fire extinguishing equipment located in the premises and on the territory of the gas station should be kept in good working order and ready for immediate use. The use of fire-fighting equipment for other purposes is not allowed.

1.9. Gas stations must be equipped with telephone (radio telephone) communication with the control center or the management of the oil depot, the nearest fire station and law enforcement agency. Telephone (radiotelephone) communication should be kept in good condition.

1.10. At the gas station, it is necessary to have a first aid kit with a set of necessary medicines to provide first aid to the injured. Filling station personnel are trained in first aid for victims of accidents.

1.11. Sanitary facilities should be kept clean and ventilated.

1.12. The speed of traffic on the territory of the gas station should not exceed 5 km / h. Transport over underground tanks is not allowed.

1.13. Trenches and pits dug on the territory of gas stations for technical purposes must be protected and marked with warning signs, and filled up after completion of work.

1.14. In winter, the footpaths and the roadway of the gas station area should be cleared of snow and ice, sprinkled with sand.

1. Volgushev A.N. Safonov A.S. Ushakov A.I.

2. http://files.stroyinf.ru/Data1/44/44698/.

3. Kovalenko, V.G.; Safonov, A.S. and etc.

4. Gas station // Great Soviet Encyclopedia.

5. A. N. Pirogov, Gas Stations in Moscow and the Moscow Region: Spatial Analysis. 2013

Hosted on Allbest.ru

...

Similar Documents

    Work with personnel, search, assignment of duties and control of their implementation in the positions: programmer, operator and driver of Vipkorma LLC. Motivation of the work of employees of the enterprise and directions for its improvement. Operator testing.

    practice report, added 09/15/2015

    Technical and production program of the marshalling yard. Calculation of volumetric and quality indicators. Planning a safe house and payroll station workers. Calculation of the cost of meters for the operational work of the sorting station.

    term paper, added 01/13/2015

    Job responsibilities of the transport operator of the dispatching service of the enterprise. Organizational structure and management bodies of the company. Obligations and rights of employees of the enterprise. Analysis of the system, identification and solutions to problems of personnel management.

    practice report, added 04/25/2014

    a brief description of enterprises of JSC "Magnitogorsk Iron and Steel Works". Calculation of the average monthly wages for the mill control station operator. Manufacturing program HPC 10. Calculation of annual output. Product cost.

    term paper, added 01/24/2013

    Organization labor relations. Optimum mode of work and rest. The composition and structure of commercial products. Dynamics of crop yields and animal productivity. Efficiency of the daily routine of the machine milking operator.

    term paper, added 01/14/2013

    The role of the railway complex for Russia. The main purpose of Blagoveshchensk station; its path development. Characteristics of OAO "Blagoveshchenskoe PPZhT". The essence of the main indicators of the station, analysis of adjoining tracks. Description of unloading operations.

    thesis, added 07/31/2012

    Legal status And organizational structure enterprise management, the main types of its activities. Job description: definition and purpose of the document, General requirements to drafting and legal force. Contents of the main sections of the manual.

    term paper, added 09/27/2011

    The concept of job description, analysis of the work of medical specialists in different medical institutions. Delimitation of the competence of individual services (divisions), exemplary position about the medical-diagnostic center, job description of the doctor.

    term paper, added 04.10.2011

    Functions, composition, rights and obligations of the organization's security service. Regulations on the department of regime and protection, the sector for processing documents classified as "commercial secret", the group of engineering and technical protection. Job description of the inspector for the regime.

    laboratory work, added 12/09/2010

    Requirements for the position of the head of the planning and economic department, his duties and qualification requirements (education and work experience in the specialty). Job description of the head of the department, his rights, professional responsibility.


^ 3 Job description of the senior operator of gas filling stations

^ I General provisions

1.1 The senior operator of the gas filling station belongs to the category of workers.

1.2 Appointment to the position of the senior operator of the gas filling station and dismissal from it is carried out by order of the head of the gas filling station on the proposal of the foreman.

1.3 The senior operator of the filling station in his work observes:

Rules for accounting for LPG and the procedure for maintaining accounting documentation;

1.4 The senior operator of the gas filling station is directly subordinate to the master.

^ II Responsibilities

2.1 The senior operator of the filling station is obliged to:

Follow all orders and instructions of the master;

Perform work in accordance with the production instructions and regulations for refueling LPG gas-balloon vehicles;

^III Rights

3.1 The senior operator of the filling station has the right to:

^ IV Responsibility

4.1 The senior operator of the filling station is responsible for:

Interchangeable master

(signature)

(surname, initials)

Familiarized with the instructions:

(signature)

(surname, initials)

^ 4 Job description of the operator for filling gas-balloon vehicles at gas filling stations (hereinafter referred to as the Filler)

^ I General provisions

1.1 Filler AGZS belongs to the category of workers.

1.2 Appointment to the position of a gas filling station filler and dismissal from it is carried out by order of the head of the gas filling station on the proposal of a shift foreman.

1.3 The gas filling station filler in its work observes:

Rules for the safe operation of process equipment and instrumentation and equipment used at gas filling stations;

Internal labor regulations.

1.4 The AGZS filler is directly subordinate to the shift foreman.

^ II Responsibilities

2.1 The gas filling station filler is obliged to:

Follow all orders and instructions of the shift foreman;

Carry out work in accordance with the production instructions and the regulations for refueling LPG gas-balloon vehicles. Maintenance by one operator of no more than two gas filling columns at the same time is allowed;

Strictly follow the rules for the operation of process equipment, safety and fire safety rules;

Follow the rules internal regulations installed on the gas station.

^III Rights

3.1 The gas filling station filler has the right to:

Get acquainted with the draft decisions of the management of the gas filling station related to its activities;

Require management to ensure security measures, compliance with the necessary sanitary and living conditions relating to its activities;

Require PPE, workwear, safety shoes and safe tools from management;

Make suggestions for improvement production activities within the scope of their competence.

^ IV Responsibility

4.1 The gas filling station filler is responsible for:

Interchangeable master

(signature)

(surname, initials)

Familiarized with the instructions:

(signature)

(surname, initials)

^ 5 Job description of a repairman for maintenance of technological equipment at a gas filling station (hereinafter referred to as a repairman of a gas filling station)

^ I General provisions

1.1 The gas filling station repairman belongs to the category of workers.

1.2 Appointment to the position of a gas filling station repairman and dismissal from it is carried out by order of the head of the gas filling station on the proposal of a shift foreman.

1.3 The gas filling station repairman in his work observes:

Rules for the safe operation of process equipment used at gas filling stations;

Internal labor regulations.

1.4 The gas filling station repairman directly reports to the shift foreman.

^ II Responsibilities

2.1 The gas filling station repairman is obliged:

Carry out work in accordance with production instructions: for the maintenance and safe operation of pressure vessels, for the maintenance and safe operation of pumps and compressors pumping LPG, for the operation of instrumentation and automation, for the maintenance and safe operation of process gas pipelines, fittings and utilities, for the maintenance and safe operation of ventilation systems , for the discharge of LPG from the tanks of autogas carriers into the tanks of gas filling stations;

Conduct operational production documentation;

2.2 Comply with the internal regulations established at the gas filling station.

^III Rights

3.1 A gas filling station mechanic has the right to:

Get acquainted with the draft decisions of the management of the gas filling station related to its activities;

Require management to ensure security measures, compliance with the necessary sanitary and living conditions relating to its activities;

Require PPE, workwear, safety shoes and safe tools from management;

Make proposals for improving production activities within its competence.

^ IV. Responsibility

4.1 The gas filling station repairman is responsible for:

For improper performance or non-performance of their official duties provided for by this job description - within the limits determined by the current labor legislation of the Republic of Uzbekistan;

For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of the Republic of Uzbekistan;

For causing material damage - within the limits determined by the current labor and civil legislation of the Republic of Uzbekistan.

Interchangeable master

(signature)

(surname, initials)

Familiarized with the instructions:

(signature)

(surname, initials)

^ 6 Job description of an electrician AGZS (hereinafter - an electrician AGZS)

^ I General provisions

1.1 The gas station electrician belongs to the category of workers.

1.2 Appointment to the position of a locksmith and dismissal from it is carried out by order of the head of the gas filling station on the proposal of a shift foreman.

1.3 The gas filling station electrician in his work observes:

Rules for the installation of electrical installations, rules for the technical operation of electrical installations of consumers and safety rules for the operation of electrical installations of consumers in the scope of the position held;

Rules for the safe operation of process equipment used at gas filling stations;

Internal labor regulations.

1.4 The gas filling station electrician reports directly to the shift foreman.

^ II Responsibilities

2.1 The gas filling station electrician is obliged to:

Possess knowledge and skills in accordance with the Unified Tariff - qualification handbook works and professions of workers and perform work in accordance with the production instructions for the operation of electrical equipment, instrumentation and A - conduct an external inspection of electrical equipment (the condition of the input of wires and cables in electrical equipment, the integrity of glass lamps, the state of grounding, the operation of the ventilation of the backwater of rooms with electrical equipment and instrumentation and A , the presence of warning labels and design marks on electrical equipment, the temperature of the outer surfaces of the housing, the integrity of fasteners), preventive tests, repair of electrical equipment;

Maintain operational production documentation;

Strictly follow the rules for the operation of process equipment, safety and fire safety rules.

Comply with the internal regulations established at the gas filling station.

^III Rights

3.1 The gas station electrician has the right to:

Get acquainted with the draft decisions of the management of the gas filling station related to its activities;

Require management to ensure security measures, compliance with the necessary sanitary and living conditions relating to its activities;

Make proposals for improving production activities within its competence.

^ IV. Responsibility

4.1 The gas filling station operator is responsible for:

Correct and safe operation of electrical equipment at gas filling stations;

Improper performance or non-performance of their official duties provided for by this job description - within the limits determined by the current labor legislation of the Republic of Uzbekistan;

Offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of the Republic of Uzbekistan;

Causing material damage - within the limits determined by the current labor and civil legislation of the Republic of Uzbekistan.

Interchangeable master

(signature)

(surname, initials)

Familiarized with the instructions:

(signature)

(surname, initials)

Appendix 5

To the "Rules of technical and

Safe operation

List of basic instructions for gas filling station personnel

I Job descriptions


  1. Head of gas station

  2. Shift foreman

  3. Senior Operator

  4. filler

  5. Locksmith - repairman for maintenance of technological equipment

  6. Locksmith - electrician

II Instructions


  1. Maintenance and safe operation of pressure vessels

  2. Maintenance and safe operation of pumps and compressors pumping LPG

  3. Maintenance and safe operation of filling and drain dispensers

  4. For the operation of electrical equipment

  5. Operation of instrumentation and automation

  6. Maintenance and safe operation of technological gas pipelines, fittings and utilities

  7. Maintenance and safe operation of ventilation systems

  8. By draining the SU from the tanks of autogas carriers into the tanks of the gas filling station

  9. For refueling LPG gas-balloon vehicles

  10. For carrying out repair work inside tanks, apparatuses, process gas pipelines

  11. For carrying out hot and gas hazardous work

  12. Providing first aid to those affected by the effects of LPG

Appendix 6

To the "Rules of technical and

Safe operation

Autogas filling stations (AGZS)»

^ Typical production instructions for refueling LPG cylinders of gas-balloon vehicles

This manual has been developed for service personnel for refueling cylinders of gas-balloon vehicles in accordance with the requirements of current regulatory documents.

On the basis of this Instruction, the corresponding production instruction must be developed and approved by the management of the gas filling station.

Personnel performing operations for filling car cylinders with liquefied gas must clearly know and strictly comply with all the requirements set forth in the production and job instructions.

Near the filling stations on the stand under the glass should be hung out:

Instructions for refueling LPG gas-balloon vehicles;

Warning posters and inscriptions "Flammable", "No smoking", etc.

When refueling, the driver of a gas-balloon car must follow all the instructions of the gas filling station service personnel.

The driver of the car arriving at the gas station must have the following documents with him for presentation to the gas filling station employees:

A waybill with a note from the mechanic of the enterprise about the serviceability of gas-balloon equipment and a permit for refueling (except for motor vehicles individuals);

Registration with authorities public service security traffic Ministry of Internal Affairs of the Republic of Uzbekistan on the conversion of a car to gas equipment;

Certificate for the right to use gas-cylinder equipment, issued specifically authorized body state supervision with an indication of the period of its validity.

Before the car enters the territory of the filling station for refueling, the driver must:

Disembark passengers;

Move at a speed not exceeding 5 km/h;

Stop at a stop sign, which must be placed in front of the filling station at a distance of at least 20 m from the filling station;

Stop at the gas station only at the command of the filler and turn off the engine.

Before starting refueling after the car is installed in the filling box indicated by the filler, the driver is obliged to present to the filler all Required documents. In case of detection of violations in the execution of documents, their absence or invalidity of any of them by the validity period, the filler is obliged to immediately send the car outside the territory of the gas filling station.

Before filling an approved or new cylinder, purge with vapor liquefied gas.

Refueling a gas-balloon car should be carried out in the following sequence.

After checking the documents by the filler, the driver must: remove the key from the ignition; install a manual parking brake; leave the cabin; open the rear and front hoods.

The filler must:

visually inspect technical condition LPG equipment and the technical condition of the car, while paying attention to: the date of the next survey; the presence of established inscriptions; serviceability of valves and valves; serviceability of the cylinder body (absence of shells, potholes, corrosion, dents); balloon fastening; change in the design of equipment; the presence of breaks in the insulation of electrical wiring and gasoline wiring of the car; the presence of leaks from the connections;

Close the flow valve on the gas equipment of the car;

Remove the safety plugs from the filling fitting;

Connect the filling hose to the filling fitting, make sure its connection is reliable;

Open filling valve;

Make sure that there is residual pressure in the cylinder;

Slowly open the valve on the filling head of the sleeve (clamp, filling nozzle);

Make sure there are no leaks in the connecting parts.

In case of its appearance, it is necessary to immediately close the tap on the filling clamp and the filling valve, reconnect the filling hose to the filling fitting and repeat the last three operations.

If a leak is found in other places caused by damage to the equipment, it is necessary to immediately stop refueling and remove the car from the territory of the filling station aids without starting the engine.

After filling the cylinder according to the application of the driver, determined by the display of the filling station, the filler must:

Close the valve on the gas filling hose;

Close the filling valve on the vehicle;

Disconnect the gas-filling hose of the column from the filling fitting of the gas-cylinder installation of the car;

Install safety plugs on the filling nozzle;

Inform the driver about the completion of refueling the car.

The driver, having received a command from the filler about the end of refueling, is obliged:

Slowly open the flow valve;

Make sure that there are no leaks in the gas-balloon equipment of the car;

Start the engine and make sure there is no leakage under the hood of the car;

Drive the car away from the filling station to a safe distance;

Make a full payment for refueling with the operator according to the values ​​​​of the counter for accounting for refueling gas;

Receive from the operator a check of the cash register for the amount of the supplied amount of gas.

If after the end of refueling and starting, the engine gives interruptions (pops), it must be immediately turned off and the car removed from the territory of the filling station by auxiliary means.

During the filling of the balloon, the filler must:

Strictly monitor the exact filling of the cylinder, avoiding its overflow. An overfilled cylinder must immediately be emptied of excess LPG;

Monitor the LPG pressure on the pressure gauge on the column, not allowing it to exceed more than 1.6 MPa (16 kgf / cm 2);

Do not hit the balloon.

In the event of emergencies at the time of refueling (when the pressure on the dispenser rises above 1.6 MPa (16 kgs/cm 2), when a leak is detected during the filling of a car cylinder, at filling dispensers, when the filling hose breaks, etc.), necessary:

Stop refueling immediately;

Close the filling valve on the car;

Close the filling valve on the filling hose;

If necessary, turn off the shut-off valves in front of the filling dispenser;

Turn off the pumping and compressor equipment;

Prohibit the entry of cars to the columns and the inclusion of car engines;

Report the incident to the shift supervisor.

In case of emergencies, it is necessary to act in accordance with the Accident Elimination Plan at the gas filling station.

AGREED: I APPROVE:

Chairman of the trade union committee Head of the organization

_____________________________ ___________________________

"____"________________ 2002_______________ 2002

Protocol No. __________________

INSTRUCTION No. ____

ON LABOR SAFETY FOR THE SENIOR OPERATOR (OPERATOR) OF GFS

I. GENERAL SAFETY REQUIREMENTS

1.1. This manual provides the basic requirements for organizing and conducting safe work senior operators (operators) in the operation of stationary gas filling stations (AGZS).

1.2. Persons who have reached the age of 18, who have been instructed, trained and tested in labor protection, safety and fire safety, and who have a photo certificate, are allowed to service gas filling stations.

      Employees allowed to work on electrical equipment, with electrical tools, as well as with machines and mechanisms with electric drive, must have an electrical safety group in accordance with the PEEP.

      Gas filling station employees must undergo a preliminary medical examination upon admission to work and periodic medical examinations in accordance with order No. 90 dated 14.03.96

      All employees allowed to work independently must undergo repeated briefing, as well as briefing on the use of collective and individual protective equipment and protective devices in order to deepen and consolidate knowledge.

      The main dangerous and harmful factor at gas filling stations is the toxicity of liquefied gas vapors, as well as moving machines and mechanisms, moving parts of production equipment

      All sections of gas filling stations must be provided with labor protection instructions approved in the prescribed manner

      Gas filling station operators must be provided with overalls, safety shoes

and personal protective equipment in accordance with current regulations, including, among other things, for work in emergency situations: cotton gown; combined gloves.

1.5. The territory of the gas filling station in the dark must be illuminated. Particular attention should be paid to the lighting of places for refueling and discharging oil products.

      The gas filling station must be equipped with a telephone connection with the control center or the management of the oil depot, the nearest fire station, and law enforcement agency. Telephone communications must be kept in good working order.

      Buildings and structures must be protected from direct lightning strikes, electrostatic, electromagnetic induction, drift of high potentials.

      Trenches and pits dug on the territory of gas filling stations for technical purposes must be fenced and marked with warning signs, and upon completion of work, they must be immediately filled up.

      All fire extinguishing equipment located in the premises and on the territory of the gas filling station must be constantly in full working order and ready for immediate use. The use of fire-fighting equipment for other purposes is prohibited.

1.11. The speed of traffic on the territory of the gas filling station ns. must exceed 5 km/h.

1.12. In winter, footpaths and the roadway of the gas filling station territory should be cleared of snow and ice and sprinkled with sand.

2. SAFETY REQUIREMENTS BEFORE YOU START

2.1. Put on overalls, check the availability of personal protective equipment.

2.2. Check the serviceability of process equipment and the availability of primary fire extinguishing equipment.

3. SAFETY REQUIREMENTS DURING WORK

3.1. Perform work in accordance with the production instructions.

3.2. Shutdown devices must be kept in good condition, ensuring quick and reliable shutdown of equipment, as well as individual sections of gas pipelines.

3.3. Open valves and valves on gas pipelines slowly and carefully to avoid water hammer.

3.4. Gas leaks can be detected using a soapy emulsion.

3.5 Workers who open the hatches of road tanks should be on the windward side to avoid inhalation of liquefied gas vapors.

3.7. The process of draining liquefied gas into the gas filling station tank from the tanker must be carried out in the presence of the gas filling station operator and the tanker driver. If a leak is detected, the drain must be stopped immediately.

3.8. When refueling vehicles at a petrol station, the following must be observed: rules: the distance between the car standing under the gas station and the one following it must be at least 3 m, and between subsequent cars in the queue, at least 1 m:

3.9.. In case of accumulation of vehicles near the gas filling station, it is necessary to ensure that the exit from the gas filling station is free and there is a possibility of maneuvering.

3.10. On the territory of gas filling stations it is forbidden to: smoke and use open fire; to perform any work not related to the reception, storage and release of liquefied gas; to store flammable liquids in the premises; to wash hands, wash clothes and wipe the floors of the premises with flammable liquids;

presence of unauthorized persons not connected with filling or draining liquefied gas;

refuel vehicles whose drivers are in a state of intoxication:

3.11. Repair and maintenance of electrical equipment of gas filling stations must be carried out by electricians with a qualification of at least 3 gr. on electrical safety.

4.1. SAFETY REQUIREMENTS IN EMERGENCIES

4.1 At the gas filling station, a plan for the elimination of possible accidents should be developed, in which, taking into account the specific conditions, it is necessary to provide for prompt actions of personnel to prevent accidents and eliminate the emergency, and in case of their occurrence ---on liquidation, exclusion of fires and explosions, max. reducing the severity of the consequences and evacuating people not involved in the elimination of accidents.

4.2. An emergency situation at a gas filling station should be considered: fire of a gas filling station:

electrical fault:

leakage of liquefied gas from a fuel dispenser, reservoir: gas contamination (over 100 mg/m 3) in the filling station building.

4.2. In all emergency situations, the operator is obliged to immediately turn off the general switch and stop refueling vehicles.

4.3. In the event of a fire, the operator is obliged to call the fire brigade, start extinguishing the fire with the available means, involving transport drivers to help, inform the tank farm dispatcher.

4.4. The operator is prohibited from making any repairs to the electrical equipment at the filling station. In the event of a malfunction of the electrical equipment, an electrician should be called.

4.5. . In case of detection of gas contamination in the gas filling station building, it is necessary to ventilate the building with natural ventilation (open doors, windows), determine the source of increased gas contamination, inform the tank farm dispatcher, and make an entry in the shift acceptance and delivery log.

5. SAFETY REQUIREMENTS AFTER WORK IS COMPLETED

5.1. Take off your clothes and put them in the closet. Overalls and footwear should be stored separately from personal clothing.

5.2. Before washing, overalls should be aired in the open air for at least two hours.

5.3. Do not leave the workplace unattended until the arrival of the next shift.

The instructions were made by:

Head of division (section)

Agreed:

HSE Engineer

Name of company

INSTRUCTION NO.

ON LABOR SAFETY

FOR THE SENIOR OPERATOR (OPERATOR)

Provides training to workers in a timely manner safe methods work. 2.11. Before performing work with hazardous working conditions, he conducts special briefings with employees. 2.12. Participates in the development and revision of instructions for the safe conduct of work. 2.13. Makes schedules for testing knowledge and participates in testing them. 2.14. Participates in the investigation of accidents and the development of measures to prevent them. 2.15. Maintains the sanitary-technical passport of the gas station (GAS). 2.16. Based on the results of measurements of sanitary and hygienic factors, it develops measures to create healthy and safe working conditions. 2.17. Organizes work on sampling groundwater for analysis for the content of petroleum products. 2.18.

Job description of the operator of gas stations of the 2nd category

SAFETY REQUIREMENTS IN EMERGENCY SITUATIONS 4.1 A plan for the elimination of possible accidents should be developed at the gas filling station, in which, taking into account the specific conditions, it is necessary to provide for operational actions of personnel to prevent accidents and eliminate an emergency, and in case of their occurrence, to eliminate, eliminate fires and explosions, Max. reducing the severity of the consequences and evacuating people not involved in the elimination of accidents. 4.2. An emergency situation at a gas filling station should be considered: fire of a gas filling station: malfunction in electrical equipment: leakage of liquefied gas from a fuel dispenser, tank: gas contamination (over 100 mg/m3) in the gas filling station building.


4.2. In all emergency situations, the operator is obliged to immediately turn off the general switch and stop refueling vehicles. 4.3.

Increasing uniqueness

AGZS the following documents: a waybill with a note from the mechanic of the enterprise about the serviceability of gas-balloon equipment and a permit for refueling (except for vehicles of individuals); registration in the bodies of the State Road Safety Service of the Ministry of Internal Affairs of the Republic of Uzbekistan on the conversion of a car to gas equipment; certificate for the right to use gas-balloon equipment, issued by a specially authorized body of state supervision with an indication of its validity period. Before the car enters the territory of the filling station for refueling, the driver is obliged to: disembark passengers; move at a speed not exceeding 5 km/h; stop at a stop sign, which must be installed in front of the filling area at a distance of at least 20 m from the filling station; stop at the gas station only at the command of the filler and turn off the engine.

Working as a gas station operator

On the territory of gas filling stations it is forbidden to: smoke and use open fire; to perform any work not related to the reception, storage and release of liquefied gas; to store flammable liquids in the premises; to wash hands, wash clothes and wipe the floors of the premises with flammable liquids; presence of unauthorized persons not connected with filling or draining liquefied gas; refuel transport, the drivers of which are in a state of intoxication: 3.11. Repair and maintenance of electrical equipment of gas filling stations must be carried out by electricians with a qualification of at least 3 gr.

on electrical safety. 4.1.

Error 404 page does not exist

Info

In the event of the temporary absence of the foreman of the filling (gas) station, his duties are performed by a person appointed by order of the head of the organization, who is responsible for their proper performance. 2. Responsibilities The foreman of a petrol (gas) station performs the following duties: 2.1.


Manages the production and economic activities of a filling (gas filling) station (gas station, gas station). 2.2. Provides proper organization and safe conduct of work, operation of equipment, mechanisms, pipelines, tools, instrumentation and protective equipment, maintenance of workplaces in proper condition.
2.3. Provides rational placement of materials, spare parts, parts, tools, fixtures. 2.4. Manages work with heightened danger. 2.5.

Job description of the operator of the gas distribution station of the 4th, 5th, 6th category

gas station (GASS), and the rules for its technical operation; - nomenclature of tools and equipment used at gas stations (GAS); - mechanization and automation production processes, measures to combat the loss of petroleum products; — systems and methods of accounting, receiving and dispensing of petroleum products; — assortment and grades of petroleum products located at gas stations (GAS); - the procedure for drawing up applications for equipment, materials, spare parts to ensure the production activities of gas stations (GASs); - kinds technical services provided by employees of gas stations (GASs) for the repair of cars, tire replacement, sale of packaged petroleum products, spare parts; — rules for the supply of petroleum products; - operating rules computer science; — Law “On the Protection environment»; — economics, organization of production, labor and management; - basics labor law; — rules and norms of labor protection and fire safety.

Forms: job description for the master of a gas filling (gas) station

The driver, having received a command from the filler about the end of refueling, must: slowly open the supply valve; make sure that there are no leaks in the gas-balloon equipment of the car; start the engine and make sure there is no leakage under the hood of the car; drive the car away from the filling station to a safe distance; make a full payment for refueling with the operator according to the values ​​​​of the counter for accounting for refueling gas; receive from the operator a check of the cash register for the amount of the released amount of gas. If after the end of refueling and starting, the engine gives interruptions (pops), it must be immediately turned off and the car removed from the territory of the filling station by auxiliary means.
During the period of filling the balloon, the filler is obliged to: strictly monitor the exact filling of the balloon, preventing it from overflowing.

Job Responsibilities of the Refueling Operator

  • The main dangerous and harmful factor at gas filling stations is the toxicity of liquefied gas vapors, as well as moving machines and mechanisms, moving parts of production equipment
  • All sections of gas filling stations must be provided with labor protection instructions approved in the prescribed manner
  • .Fuel filling station operators must be provided with overalls, special footwear
  • and personal protective equipment in accordance with current regulations, including, among other things, for work in emergency situations: cotton gown; combined gloves. 1.5. The territory of the gas filling station in the dark must be illuminated.
    Particular attention should be paid to the lighting of places for refueling and discharging oil products.
  1. All fire extinguishing equipment located in the premises and on the territory of the gas filling station must be constantly in full working order and ready for immediate use.

Controls the correctness of acceptance of all types of fuel entering the gas station (GAS), related products and preparing them for sale. 2.24. Supervises the maintenance, timely repair and maintenance during the operation of fuel-dispensing equipment, the accuracy of fuel dispensing.

3. Rights The foreman of a petrol (gas) station has the right to: 3.1. Submit proposals on measures to organize work in the assigned work area for consideration by the management of the organization.
3.2. Sign and endorse documents within their competence. 3.3. Within its competence, report to the immediate supervisor about all shortcomings in the activities of the organization ( structural unit, individual workers) identified in the course of the performance of their duties, and make proposals for their elimination.
3.4.

AGREED: APPROVED: Chairman of the trade union committee Head of the organization » » 2002 2002 Protocol No. INSTRUCTION No. ON LABOR SAFETY FOR THE SENIOR OPERATOR (OPERATOR) OF GFS I. GENERAL SAFETY REQUIREMENTS 1.1. This instruction provides for the basic requirements for organizing and conducting the safe work of senior operators (operators) during the operation of stationary gas filling stations (AGFS).

1.2. Persons who have reached the age of 18, who have been instructed, trained and tested in labor protection, safety and fire safety, and who have a photo certificate, are allowed to service gas filling stations.
II Responsibilities 2.1 The gas filling station repairman is obliged to: perform work in accordance with the production instructions: for the maintenance and safe operation of pressure vessels, for the maintenance and safe operation of pumps and compressors pumping LPG, for the operation of instrumentation and automation, for maintenance and safe operation of technological gas pipelines, fittings and utilities, maintenance and safe operation of ventilation systems, discharge of LPG from gas tankers into gas filling stations; maintain operational production documentation; strictly comply with the rules for the operation of technological equipment, safety and fire safety rules. 2.2 Comply with the internal regulations established at the gas filling station.
In the event of a fire, the operator is obliged to call the fire brigade, start extinguishing the fire with the available means, involving transport drivers to help, inform the tank farm dispatcher. 4.4. The operator is prohibited from making any repairs to the electrical equipment at the filling station.

Attention

In the event of a malfunction of the electrical equipment, an electrician should be called. 4.5. . In case of detection of gas contamination in the gas filling station building, it is necessary to ventilate the building with natural ventilation (open doors, windows), determine the source of increased gas contamination, inform the tank farm dispatcher, and make an entry in the shift acceptance and delivery log.


5. SAFETY REQUIREMENTS AFTER WORK COMPLETION 5.1. Take off your clothes and put them in the closet. Overalls and footwear should be stored separately from personal clothing. 5.2. Before washing, overalls should be aired in the open air for at least two hours. 5.3.

Job description of the gas station operator

Job description of the gas station operator | Sample

Job description of the Operator of the gas station.

1. GENERAL PROVISIONS

1.1. This job description defines the goals and objectives, as well as the rights and responsibilities of the Gas Station Operator.

1.2. The operator reports directly to the administrator of the gas station.

1.3. Subordinate to the operator are Refuelers and Janitor.

1.4. The operator must be fluent in all methods of work on cash registers, electronic card terminals and fuel dispenser control terminals used at the enterprise.

1.5. The operator must know:

1.5.1. resolutions, orders, orders, other guidelines and regulations concerning filling stations and conducting cash transactions;

1.5.2. forms of cash documents;

1.5.3. rules for acceptance, collection, accounting and storage Money;

1.5.4. the procedure for processing incoming and outgoing documents;

1.5.5. limits on cash balances established for the enterprise;

1.5.6. rules for maintaining a cash book, compiling cash reports;

1.5.7. operating rules for cash registers, an electronic card service terminal and a fuel dispenser control terminal;

1.5.8. "Rules for Working with Clients", "Safety Rules", "Fire Safety Rules at Gas Stations", "Internal Labor Regulations";

1.5.9. job descriptions of the Refueler and Janitor.

2. OBJECTIVES

2.1. Fast service, which takes a minimum of time from the Client, accuracy and precision in the performance of operations.

2.2. Uninterrupted operation of gas stations.

2.3. Quality service to the maximum number of customers.

2.4. Clear and coordinated work of the filling station personnel.

3. TASKS (FUNCTIONAL DUTIES)

3.1. Come to work in clean clothes and look neat.

3.2. Serve clients strictly in accordance with the "Rules for working with clients".

3.3. To carry out operations for receiving payments and dispensing to customers the fuel they purchase, namely:

3.3.1. in cash (by amount or by number of liters):

– receive from the client funds according to the amount or number of liters called by the client, as well as information about the type of fuel being filled and the fuel dispenser number;

- clearly tell the client the amount of money received from him, the number of liters dispensed, the type of fuel and the fuel dispenser number.

- include fuel supply for the amount or number of liters paid by the client.

- punch on cash register check

3.3.2. in cash (up to a full tank):

— receive money from the client, as well as information about the type of fuel being filled and the fuel dispenser number;

- clearly tell the client the amount of money received from him, the number of liters dispensed (up to a full tank), the type of fuel and the fuel dispenser number.

— include fuel supply for the amount paid by the client.

- name the amount of change due to the buyer and issue the change to the buyer along with the check (paper notes and small change are issued by the Cashier at the same time).

3.3.3. for cashless payments (electronic cards of TNK):

– to receive from the client an electronic card, as well as information on the number of refueling liters, the type of refueling fuel and the fuel dispenser number;

— insert the card into the terminal and check the availability of funds on the card;

– clearly tell the client the number of liters dispensed (up to a full tank), the type of fuel and the fuel dispenser number;

— enable fuel supply in the amount specified by the client (in case of supply up to a full tank, enable fuel supply in an amount not exceeding the funds available on the client’s card);

- after stopping the fuel dispenser, punch a check on the cash register.

— give the client a card and a check punched by the terminal;

3.3.4. for cashless payments (coupons):

— receive a coupon from the client, as well as information about the number of the fuel dispenser;

– clearly tell the client the number of liters dispensed, the type of fuel and the fuel dispenser number;

— include the supply of fuel in the amount indicated on the ticket;

- punch a check on a cash register;

- cut the coupon along the tear line, stamp both halves and give the client the half due to him.

3.4. Refunds to customers only if the amount of fuel ordered by the customer does not fit in the tank. Make a return:

3.4.1. by electronic cards in accordance with the instructions for using the terminal;

3.4.2. in cash in accordance with the instructions for use cash register and rules for conducting cash transactions.

3.5. Ensure the safety of money at the cash desk, namely:

3.5.1. not allow the presence in the "operator's room" of unauthorized persons who are not related to the staff of the gas station;

3.5.2. handle money carefully (do not pollute it and do not make any inscriptions on paper banknotes).

3.6. Transfer money to collectors, namely:

3.6.1. prepare the amount for collection;

3.6.2. equally fill in the three accompanying statements;

3.6.3. check the identity of bank employees;

3.6.4. get a receipt from the collectors on the receipt of money.

3.7. Carry out the reception of fuel into the tanks, in the following sequence:

3.7.1. measure the fuel level in the tank before draining;

3.7.2. serve all the customers remaining after the blocking of the entrance to the gas station.

3.7.3. Estimate the amount of fuel in the tanker.

3.7.4. In case of shortage of fuel in the fuel truck, do not take the car for draining, but if the level is normal, accept documents from the driver (TTN and Passport).

3.7.5. continue the supply of fuel to customers, with the exception of the brand of fuel which is being drained;

3.7.6. measure the fuel level in the tank after draining;

3.8. Do not allow water to enter tanks. Make sure that once per shift, and during periods of rain and heavy snowmelt, constantly (at least once per hour), the Refueler checks the presence of water in the reservoir shafts and, if it appears, pumps it out.

3.9. To hand over a shift (to accept a shift) by filling out (checking the filling out) the following documents:

3.9.1. shift report (2 copies);

3.9.2. attachment to the shift report;

3.9.3. fuel meter reading report;

3.9.4. indicator of counters for cash registers and information on revenue;

3.9.5. cash book;

3.9.6. a book on the reception of petroleum products;

3.9.7. documents for accepted fuel.

3.10. Supervise the work of subordinates, namely:

3.10.1. assign tasks to subordinates in accordance with their job descriptions and monitor the fulfillment of the assigned tasks;

3.10.2. determine the type and amount of responsibility of subordinates in case of non-compliance with their job descriptions.

3.11. Inform the management about the existing shortcomings in customer service of gas stations.

3.12. Ensure cleanliness and order in the workplace.

3.13. Observe the "Fire Safety Rules at Gas Stations" in the event of a fire or an emergency, act in accordance with these rules.

4. RIGHTS

4.1. The operator has the right:

4.1.1. Temporarily close gas stations in the following cases:

— reception of fuel;

- the occurrence of an emergency;

- changeover.

4.1.2. Take, relying solely on the "Rules for working with a client", appropriate actions to eliminate conflict situations and the causes that led to them.

4.1.3. Make proposals to the administration of the enterprise aimed at improving the work of the Operator or the enterprise as a whole.

4.1.4. Make proposals to the administration of the enterprise on additional incentives for the work of Refuelers and the Janitor.

4.1.5. Inform the administration of the enterprise about the facts of manifestation of incompetence or unprofessionalism on the part of the personnel of the gas station.

5. RESPONSIBILITY

5.1. The operator is responsible for:

5.1.1. failure to complete the assigned tasks.

5.1.2. inaccurate information about the status of the execution of the received tasks and instructions, violation of the deadlines for their execution.

5.1.3. failure to comply with orders, directives of the direct management and administration of the enterprise.

5.1.4. violation of the Rules for Working with Clients, the Rules for Internal Labor Regulations, the Fire Safety Rules, and the Safety Rules.

5.1.5. violation of the rules of conducting cash transactions.

5.1.6. loss, damage, shortage of money and other material assets in accordance with the agreement concluded with the Cashier on full liability.

5.2. The types and extent of the Operator's liability are determined by the orders of the enterprise administration.

6. WORKING CONDITIONS

6.1. The Operator's working hours are determined in accordance with the "Internal Labor Regulations" established at the enterprise.

7. NOTES:

7.1. This job description is made in triplicate:

7.1.1. the first instance for the Operator;

7.1.2. second copy for Administrator;

7.1.3. the third copy for the head of the enterprise;

7.2. This job description is signed by the employee being hired and the head of the enterprise

7.3. The employer reserves the right to make additions or changes to this job description

Familiarized with the instructions:

"_____" ________________200


2023
newmagazineroom.ru - Accounting statements. UNVD. Salary and personnel. Currency operations. Payment of taxes. VAT. Insurance premiums