We bring to your attention a typical example of a repair engineer job description, sample 2019/2020. A person who has a higher professional (technical) education without presenting requirements for work experience or secondary professional (technical) education and at least 3 years of work experience as a technician of category I for at least 3 years or other positions filled by specialists with secondary vocational education, not less than 5 years. Do not forget, each repair engineer's instruction is issued on hand against receipt.
It provides typical information about the knowledge that a repair engineer should have. About duties, rights and responsibilities.
This material is included in the huge library of our site, which is updated daily.
1. General Provisions
1. The repair engineer belongs to the category of specialists.
2. A repair engineer accepts a person who has a higher professional (technical) education without presenting requirements for work experience or secondary professional (technical) education and at least 3 years of experience as a technician of category I or other positions filled by specialists with secondary vocational education, at least 5 years.
3. The repair engineer is hired and dismissed from the post by ___________ organization (director, head) on the proposal of ________. (job title)
4. The repair engineer must know:
- resolutions, orders, orders, methodological and regulatory materials for the maintenance and repair of equipment, prospects for the technical development of the enterprise;
- organization of repairs and Maintenance equipment;
— unified system preventive maintenance and rational operation technological equipment;
- specifications, design features, purpose and modes of operation of the enterprise equipment, its rules technical operation;
— Methods for planning repairs;
— basic technological processes production of the company's products;
– advanced repair systems and repair technology;
- the procedure for drawing up estimates for repairs, applications for equipment, materials, spare parts, tools, etc.;
— fundamentals of economics, organization of production, labor and management;
— basics of labor legislation;
- Rules and norms of labor protection.
5. In his work, the repair engineer is guided by:
— legislation Russian Federation,
- Charter (regulations) of the organization,
- orders and orders of _________ organization, ( CEO, director, leader)
- this job description,
— Rules of internal work schedule organizations.
6. Repair engineer reports directly to: _________. (job title)
7. During the absence of a repair engineer (business trip, vacation, illness, etc.), his duties are performed by a person appointed by __________ (position) of the organization in the prescribed manner, who acquires the appropriate rights, duties and is responsible for the performance of the duties assigned to him.
2. Responsibilities of a repair engineer
Repair Engineer:
1. Carries out the development of promising and current plans(charts) various kinds repairs of equipment and other fixed assets of the enterprise (buildings, water supply systems, sewerage, air ducts, etc.), as well as measures to improve their operation and maintenance, controls the implementation of approved plans (schedules).
2. Promotes the introduction of integrated regulated maintenance systems that ensure timely adjustment and repair of equipment, efficient work enterprises, progressive repair technology, highly efficient repair devices, mechanization of labor-intensive processes.
3. Takes part in the verification technical condition equipment, the quality of repair work, as well as in the acceptance of equipment newly supplied to the enterprise, in necessary cases draws up documentation for its write-off or transfer to other enterprises.
4. Organizes the preparation of repair work, determines the need for spare parts for the repair of equipment, to provide the enterprise with them on the terms of cooperation.
5. Carries out control over the activities of the divisions of the enterprise involved in the repair and testing of equipment, over compliance with the rules of operation, maintenance and supervision of it.
6. Develops measures aimed at improving the organization of maintenance and repair of equipment, reducing the complexity and cost of repair work, improving their quality, increasing the efficiency of using fixed assets (increasing wear resistance and reducing equipment downtime).
7. Participates in the planning of the technical development of production, overhaul and modernization of fixed assets, balance sheet production capacity and their use.
8. Develops regulatory materials for preventive maintenance and repair of equipment (standards for repair and maintenance costs, service life of spare parts, nomenclature of replaceable and wear parts, consumption rates and limits lubricants).
9. Analyzes the causes of increased wear, accidents and downtime of equipment and participates in the investigation of their causes, as well as the causes of industrial injuries, takes measures to prevent it.
10. Monitors compliance with the established deadlines for compiling defect reports, requests for repairs.
11. Draws up applications and specifications for spare parts, materials, tools, controls the correctness of their spending.
12. Prepares materials for concluding contracts with manufacturers for the supply of spare parts and equipment, as well as with specialized contractors for the overhaul of fixed (industrial and non-industrial) assets, monitors the spending of funds for these purposes.
13. Participates in work related to the development and implementation of standards and specifications operation, maintenance and repair of equipment.
14. Gives opinions on rationalization proposals and inventions, on improving the design of equipment, organizing repair work and maintenance of equipment, provides innovators and inventors practical help and organizes the implementation of the accepted proposals.
15. Generalizes and disseminates best practices in the organization of repair and operation of equipment.
16. Keeps records and certification of equipment, buildings, structures and other fixed assets of the enterprise, makes changes to the passports after their repair, modernization and reconstruction, draws up the necessary technical documentation and maintains proper reporting.
3. Rights of a repair engineer
The repair engineer has the right to:
1. Submit proposals for management consideration:
– to improve the work related to the provisions of this responsibilities,
- on the promotion of distinguished employees subordinate to him,
— on bringing to material and disciplinary responsibility employees who violated production and labor discipline.
2. Request from structural divisions and employees of the organization the information necessary for him to perform his duties.
3. Get acquainted with the documents that define his rights and obligations in his position, the criteria for assessing the quality of performance of official duties.
4. Get acquainted with the draft decisions of the organization's management regarding its activities.
5. Require the management of the organization to provide assistance, including the provision of organizational and technical conditions and registration established documents necessary for the performance of official duties.
6. Other rights established by the current labor law.
4. Responsibility of the repair engineer
The repair engineer is responsible for the following:
1. For improper performance or non-performance of their official duties provided for by this job description - within the limits established by the labor legislation of the Russian Federation.
2. For offenses committed in the course of their activities - within the limits established by the current administrative, criminal and civil legislation of the Russian Federation.
3. For causing material damage organizations - within the limits established by the current labor and civil legislation of the Russian Federation.
Job description repair engineer - sample 2019/2020. Responsibilities of a repair engineer, rights of a repair engineer, responsibility of a repair engineer.
Download job descriptionrepair engineer(.doc, 95KB)
I. General provisions
- Repair engineer belongs to the category of specialists
- For the position:
- a repair engineer is appointed by a person who has a higher professional (technical) education without any work experience or a secondary professional (technical) education and at least 3 years of experience as a technician of category I, or at least 5 years in other positions occupied by specialists with secondary vocational education;
- repair engineer of category II - a person with a higher professional (technical) education and work experience as a repair engineer or other engineering and technical positions filled by specialists with higher professional education for at least 3 years;
- Category I repair engineer - a person with a higher professional (technical) education and work experience as a category II repair engineer for at least 3 years.
- Appointment and dismissal of a maintenance engineer
- The repair engineer must know:
- 4.1. Decrees, orders, orders, methodological and regulatory materials for the maintenance and repair of equipment.
- 4.2. Prospects for the technical development of the enterprise.
- 4.3. Organization of repair work and maintenance of equipment.
- 4.4. A unified system of preventive maintenance and rational operation of process equipment.
- 4.5. Specifications, design features, purpose and operating modes of the enterprise equipment, rules for its technical operation.
- 4.6. Repair planning methods.
- 4.7. The main processes of production of the company's products.
- 4.8. Advanced repair systems and repair technology.
- 4.9. The procedure for drawing up estimates for repairs, applications for equipment, materials, spare parts, tools, etc.
- 4.10. Fundamentals of economics, organization of production, labor and management.
- 4.11. Fundamentals of labor legislation.
- 4.12. Rules and norms of labor protection.
- During the absence of a repair engineer (illness, vacation, business trip, etc.), his duties are performed by a person appointed in the prescribed manner. This person acquires the appropriate rights and is responsible for the proper performance of the duties assigned to him.
II. Job Responsibilities
Repair Engineer:
- Carries out the development of long-term and current plans (schedules) for various types of repair of equipment and other fixed assets of the enterprise (buildings, water supply systems, sewerage, air ducts, etc.), as well as measures to improve their operation and maintenance, monitors the implementation of approved plans (schedules).
- Promotes the introduction of integrated regulated maintenance systems that ensure timely adjustment and repair of equipment, efficient operation of the enterprise, advanced repair technology, highly efficient repair devices, and mechanization of labor-intensive processes.
- Takes part in checking the technical condition of the equipment, the quality of repair work, as well as in the acceptance of equipment newly supplied to the enterprise, if necessary, draws up documentation for its write-off or transfer to other enterprises.
- Organizes the preparation of repair work, determines the need for spare parts for the repair of equipment, to provide the enterprise with them on a cooperation basis.
- Carries out control over the activities of the company's divisions involved in the repair and testing of equipment, over compliance with the rules of operation, maintenance and supervision of it.
- Develops measures aimed at improving the organization of maintenance and repair of equipment, at reducing the complexity and cost of repair work, improving their quality, increasing the efficiency of using fixed assets (increasing wear resistance and reducing equipment downtime).
- Participates in the work on planning the technical development of production, overhaul and modernization of fixed assets, drawing up a balance of production capacities and their use.
- Develops normative materials for preventive maintenance and repair of equipment (standards for repair and maintenance costs, service life of spare parts, nomenclature of replaceable and wear parts, norms and limits for lubricant consumption).
- Analyzes the causes of increased wear, accidents and downtime of equipment and participates in the investigation of their causes, as well as the causes of industrial injuries, takes measures to prevent it.
- Carries out control over compliance with the established deadlines for compiling lists of defects, requests for repairs.
- Makes requests and specifications for spare parts, materials, tools, controls the correctness of their spending.
- Prepares materials for concluding contracts with manufacturers for the supply of spare parts and equipment, as well as with specialized contractors for the overhaul of fixed (industrial and non-industrial) assets, controls the spending of funds for these purposes.
- Takes part in the work related to the development and implementation of standards and specifications for the operation, maintenance and repair of equipment.
- Gives opinions on rationalization proposals and inventions, on issues of improving the design of equipment, organization of repair work and maintenance of equipment, provides practical assistance to innovators and inventors and organizes the implementation of the accepted proposals.
- Summarizes and disseminates best practices in the organization of repair and operation of equipment.
- Keeps records and certification of equipment, buildings, structures and other fixed assets of the enterprise, makes changes to the passports after their repair, modernization and reconstruction, draws up the necessary technical documentation and maintains the established reporting.
- Performs individual official assignments of his immediate supervisor.
III. Rights
The repair engineer has the right to:
- Get acquainted with the draft decisions of the management of the enterprise relating to its activities.
- Submit proposals for the management to improve the work related to the duties provided for in this job description.
- Notify the immediate supervisor of any deficiencies identified in the course of the performance of their duties in production activities enterprise (its structural subdivisions) and make proposals for their elimination.
- Request personally or on behalf of the immediate supervisor from the heads of enterprise departments and specialists information and documents necessary for the performance of his duties.
- Involve specialists from all (individual) structural divisions in solving the tasks assigned to him (if this is provided for by the regulations on structural divisions, if not, then with the permission of the management).
- Require the management of the enterprise to assist in the performance of his duties and rights.
IV. Responsibility
The repair engineer is responsible for:
- For improper performance or non-performance of their official duties provided for by this job description - to the extent determined by the current labor legislation of the Russian Federation.
- For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of the Russian Federation.
- For causing material damage - within the limits determined by the current labor and civil legislation of the Russian Federation.
I. GENERAL PROVISIONS
1. The repair engineer belongs to the category of specialists.
2. Appointment to the position of a Repair Engineer and dismissal from it is carried out by order of the General Director of the organization.
3. Qualification requirements.
Category I repair engineer: higher technical education and work experience as a category II repair engineer for at least 3 years.
Category II repair engineer: higher technical education and work experience as a repair engineer or in other engineering and technical positions filled by specialists with higher education, not less than 3 years.
Repair engineer: higher technical education without requirements for work experience or secondary specialized education and work experience as a technician
4. The repair engineer must know:
- resolutions, orders, orders of higher authorities, methodological, regulatory and other guidance materials for the maintenance and repair of equipment
prospects for the technical development of the enterprise
– organization of repair work and maintenance of equipment
— A unified system of preventive maintenance and rational operation of process equipment
- technical characteristics, design features, purpose and operating modes of the enterprise equipment, rules for its technical operation
— repair planning methods
– the main technological processes for the production of the enterprise’s products
– advanced repair systems and repair technology
- the procedure for drawing up estimates for repairs, applications for equipment, materials, spare parts, tools, etc.
- fundamentals of economics, scientific organization labor, organization of production and management
— fundamentals of labor law
— rules and norms of labor protection, safety measures, industrial sanitation and fire protection.
II. JOB DUTIES
Repair Engineer:
1. Carries out the development of monthly, quarterly and annual plans(schedules) of various types of repair of equipment and other fixed assets of the enterprise (buildings, water supply systems, sewerage, air ducts, etc.), as well as measures to improve their operation and maintenance, monitors the implementation of approved plans (schedules).
2. Promotes the introduction of integrated regulated maintenance systems that ensure timely adjustment and repair of equipment, sustainable efficient operation of the enterprise.
3. Participates in checking the technical condition of the equipment, the quality of repair work, as well as in the acceptance of equipment newly supplied to the enterprise, if necessary, draws up documentation for its write-off or transfer to other enterprises.
4. Ensures the preparation of repair work, takes measures to implement the allocated funds for spare parts for the repair of equipment, to provide the enterprise with them on the terms of cooperation.
5. Carries out control over the activities of departments during the repair work and testing of equipment, over compliance with the rules of operation, maintenance and supervision of it, develops measures aimed at improving the organization of maintenance and repair of equipment, at reducing the labor intensity and cost of repair work, improving their quality, increasing the efficiency of using fixed assets (increasing wear resistance and reducing equipment downtime).
6. Participates in the work on planning the technical development of production, overhaul and modernization of fixed assets, the balance of production capacities and their use.
7. Develops normative materials for preventive maintenance and repair of equipment (standards for repair and maintenance costs, service life of spare parts, nomenclature of replacement and wear parts, norms and limits for lubricant consumption), participates in the investigation of the causes of increased wear, equipment accidents and industrial injuries and takes measures to prevent them.
8. Monitors compliance with the established deadlines for compiling defect reports, requests for repairs.
9. Draws up applications and specifications for spare parts, materials, tools, controls the correctness of their consumption.
10. Prepares materials for concluding contracts with manufacturers for the supply of spare parts and equipment, as well as with specialized contractors for the overhaul of fixed (industrial and non-industrial) assets, monitors the spending of funds for these purposes.
11. Takes part in the work related to the development and implementation of standards and specifications for the operation, maintenance and repair of equipment.
12. Gives opinions on rationalization proposals and inventions, on issues of improving the design of equipment, organization of repair work and maintenance, provides practical assistance to innovators and inventors and organizes the implementation of accepted proposals, generalizes and disseminates best practices in the organization of repair and operation of equipment.
13. Keeps records and certification of equipment, buildings, structures and other fixed assets of the enterprise, makes changes to the passports after their repair, modernization and reconstruction, draws up the established reporting and other technical documentation.
III. RIGHTS:
The repair engineer has the right to:
1. Get acquainted with the draft decisions of the organization's management regarding its activities.
2. Submit proposals for the management to improve the work related to the responsibilities provided for in this instruction.
3. Within the limits of its competence, report directly to the head of all the shortcomings identified in the course of activities and make proposals for their elimination.
4. Request personally or on behalf of the management of the organization the documents necessary for the performance of his duties.
5. Require the head of the organization to assist in the performance of his duties and rights.
IV. RESPONSIBILITY:
The repair engineer is responsible for:
1. For improper performance or non-performance of their official duties provided for by this job description - to the extent determined by the current labor legislation of the Russian Federation.
2. For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of the Russian Federation.
3. For causing material damage - within the limits determined by the current labor and civil legislation of the Russian Federation.
INSTRUCTIONS
REPAIR ENGINEER
|
name of the institution, |
|||
|
organizations |
|||
|
JOB DESCRIPTION |
APPROVE |
||
|
(director; other executive, |
|||
|
00.00.0000№ 00 |
authorized to approve |
||
|
repair engineer |
|||
|
job description) |
|||
|
(signature) |
(surname, initials) |
||
|
00.00.0000 |
|||
1. The repair engineer is a professional
2. For the position:
A repair engineer is appointed by a person who has a higher professional (technical) education without any work experience or a secondary professional (technical) education and at least 3 years of experience as a technician of category I, or at least 5 years in other positions occupied by specialists with secondary vocational education;
Category II repair engineer - a person with a higher professional (technical) education and at least 3 years of experience as a repair engineer or other engineering and technical positions filled by specialists with higher professional education;
Category I repair engineer - a person with a higher professional (technical) education and work experience as a category II repair engineer for at least 3 years.
3. Appointment and dismissal of a repair engineer
|
is made by order of the director of the enterprise upon presentation |
||
4. The repair engineer must know:
4.1. Decrees, orders, orders, methodological and regulatory materials for the maintenance and repair of equipment.
4.2. Prospects for the technical development of the enterprise.
4.3. Organization of repair work and maintenance of equipment.
4.4. A unified system of preventive maintenance and rational operation of process equipment.
4.5. Technical characteristics, design features, purpose and operating modes of the enterprise equipment, rules for its technical operation.
4.6. Repair planning methods.
4.7. The main processes of production of the company's products.
4.8. Advanced repair systems and repair technology.
4.9. The procedure for drawing up estimates for repairs, applications for equipment, materials, spare parts, tools, etc.
4.10. Fundamentals of economics, organization of production, labor and management.
4.11. Fundamentals of labor legislation.
4.12. Rules and norms of labor protection.
|
4.13. |
|
5. Repair engineer reports directly |
||
|
(head |
||
|
corresponding structural unit; another official) |
||
6. During the absence of a repair engineer (illness, vacation, business trip, etc.), his duties are performed by a person appointed in the prescribed manner. This person acquires the appropriate rights and is responsible for the proper performance of the duties assigned to him.
II. Job Responsibilities
Repair Engineer:
1. Carries out the development of long-term and current plans (schedules) for various types of repair of equipment and other fixed assets of the enterprise (buildings, water supply systems, sewerage, air ducts, etc.), as well as measures to improve their operation and maintenance, monitors the implementation of approved plans (schedules).
2. Promotes the introduction of integrated regulated maintenance systems that ensure timely adjustment and repair of equipment, efficient operation of the enterprise, advanced repair technology, highly efficient repair devices, and mechanization of labor-intensive processes.
3. Takes part in checking the technical condition of the equipment, the quality of repair work, as well as in the acceptance of equipment newly received at the enterprise, if necessary, draws up documentation for its write-off or transfer to other enterprises.
4. Organizes the preparation of repair work, determines the need for spare parts for the repair of equipment, to provide the enterprise with them on the terms of cooperation.
5. Carries out control over the activities of the divisions of the enterprise involved in the repair and testing of equipment, over compliance with the rules of operation, maintenance and supervision of it.
6. Develops measures aimed at improving the organization of maintenance and repair of equipment, reducing the complexity and cost of repair work, improving their quality, increasing the efficiency of using fixed assets (increasing wear resistance and reducing equipment downtime).
7. Participates in the work on planning the technical development of production, overhaul and modernization of fixed assets, drawing up a balance of production capacities and their use.
8. Develops regulatory materials for preventive maintenance and repair of equipment (standards for repair and maintenance costs, service life of spare parts, nomenclature of replaceable and wear parts, norms and limits for lubricant consumption).
9. Analyzes the causes of increased wear, accidents and downtime of equipment and participates in the investigation of their causes, as well as the causes of industrial injuries, takes measures to prevent it.
10. Monitors compliance with the established deadlines for compiling defect reports, requests for repairs.
11. Draws up applications and specifications for spare parts, materials, tools, controls the correctness of their spending.
12. Prepares materials for concluding contracts with manufacturers for the supply of spare parts and equipment, as well as with specialized contractors for the overhaul of fixed (industrial and non-industrial) assets, monitors the spending of funds for these purposes.
13. Takes part in the work related to the development and implementation of standards and specifications for the operation, maintenance and repair of equipment.
14. Gives opinions on rationalization proposals and inventions, on issues of improving the design of equipment, organization of repair work and maintenance of equipment, provides practical assistance to innovators and inventors and organizes the implementation of the accepted proposals.
15. Generalizes and disseminates best practices in the organization of repair and operation of equipment.
16. Keeps records and certification of equipment, buildings, structures and other fixed assets of the enterprise, makes changes to the passports after their repair, modernization and reconstruction, draws up the necessary technical documentation and maintains the established reporting.
17. Performs individual official assignments of his immediate supervisor.
III. Rights
The repair engineer has the right to:
1. Get acquainted with the draft decisions of the management of the enterprise relating to its activities.
2. Submit proposals for the management to improve the work related to the duties provided for in this job description.
3. Report to the immediate supervisor about all the shortcomings in the production activities of the enterprise (its structural divisions) identified in the course of the performance of their duties and make proposals for their elimination.
4. Request personally or on behalf of the immediate supervisor from the heads of departments of the enterprise and specialists information and documents necessary for the performance of his duties.
5. To involve specialists from all (individual) structural divisions in solving the tasks assigned to him (if this is provided for by the regulations on structural divisions, if not, then with the permission of the management).
6. Require the management of the enterprise to assist in the performance of his duties and rights.
IV. Responsibility
The repair engineer is responsible for:
1. For improper performance or non-performance of their official duties provided for by this job description - to the extent determined by the current labor legislation of the Russian Federation.
2. For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of the Russian Federation.
3. For causing material damage - within the limits determined by the current labor and civil legislation of the Russian Federation.
|
Head of structural unit |
||||||
|
(signature) |
(surname, initials) |
|||||
|
00.00.0000 |
||||||
|
AGREED: |
||||||
|
Boss legal department |
||||||
|
(signature) |
(surname, initials) |
|||||
|
00.00.0000 |
||||||
|
Familiarized with the instructions: |
||||||
|
(signature) |
(surname, initials) |
|||||
|
00.00.0000 |
||||||
The plasma cutting inverter is designed for wide use and can be applied to cut stainless steel, alloy steel, mild steel, aluminum, copper and other non-ferrous metals. Designed using a high frequency ferrite core transformer and power transistors.
APPROVE
Supervisor ______________________
____________________ (____________)
JOB DESCRIPTION
repair engineer
1. GENERAL PROVISIONS
1.1. This job description defines the functional duties, rights and responsibilities of a repair engineer (hereinafter referred to as the "engineer") _______________ (hereinafter referred to as the "Company").
1.2. The engineer is appointed to the position and dismissed from the position in accordance with the procedure established by the current labor legislation by order of the head of the Company.
1.3. The engineer reports directly to ________________ Society.
1.4. A person is appointed to the position of an engineer who has:
Category I repair engineer: higher professional (technical) education and work experience as a category II repair engineer for at least 3 years.
Category II repair engineer: higher professional (technical) education and work experience as a repair engineer or other engineering and technical positions filled by specialists with higher professional education, at least 3 years.
Repair engineer: higher vocational (technical) education without requirements for work experience or secondary vocational (technical) education and at least 3 years of experience as a technician of category I or at least 5 years in other positions filled by specialists with secondary vocational education.
1.5. The engineer must know:
- resolutions, orders, orders, methodological and regulatory materials for the maintenance and repair of equipment, prospects for the technical development of the enterprise; organization of repair work and maintenance of equipment; Unified system of preventive maintenance and rational operation of technological equipment; technical characteristics, design features, purpose and modes of operation of the equipment of the enterprise, rules for its technical operation; repair planning methods; the main technological processes for the production of the enterprise's products; advanced repair systems and repair technology; the procedure for drawing up estimates for repairs, applications for equipment, materials, spare parts, tools, etc.; fundamentals of economics, organization of production, labor and management; fundamentals of labor legislation; labor protection rules and regulations.
1.6. During the period of temporary absence of an engineer, his duties are assigned to _______________________.
2. FUNCTIONAL RESPONSIBILITIES
The engineer has the following responsibilities:
Carries out the development of long-term and current plans (schedules) for various types of repair of equipment and other fixed assets of the enterprise (buildings, water supply systems, sewerage, air ducts, etc.), as well as measures to improve their operation and maintenance, monitors the implementation of approved plans (schedules).
Promotes the introduction of integrated regulated maintenance systems that ensure timely adjustment and repair of equipment, efficient operation of the enterprise, advanced repair technology, highly efficient repair devices, and mechanization of labor-intensive processes.
Takes part in checking the technical condition of the equipment, the quality of repair work, as well as in the acceptance of equipment newly supplied to the enterprise, if necessary, draws up documentation for its write-off or transfer to other enterprises.
Organizes the preparation of repair work, determines the need for spare parts for the repair of equipment, to provide the enterprise with them on the terms of cooperation.
Carries out control over the activities of the company's divisions involved in the repair and testing of equipment, over compliance with the rules of operation, maintenance and supervision of it.
Develops measures aimed at improving the organization of maintenance and repair of equipment, at reducing the complexity and cost of repair work, improving their quality, increasing the efficiency of using fixed assets (increasing wear resistance and reducing equipment downtime).
Participates in the work on planning the technical development of production, overhaul and modernization of fixed assets, drawing up a balance of production capacities and their use.
Develops normative materials for preventive maintenance and repair of equipment (standards for repair and maintenance costs, service life of spare parts, nomenclature of replaceable and wear parts, norms and limits for lubricant consumption).
Analyzes the causes of increased wear, accidents and downtime of equipment and participates in the investigation of their causes, as well as the causes of industrial injuries, takes measures to prevent it.
Monitors compliance with the established deadlines for compiling defect reports, requests for repairs.
Makes requests and specifications for spare parts, materials, tools, controls the correctness of their spending.
Prepares materials for concluding contracts with manufacturers for the supply of spare parts and equipment, as well as with specialized contractors for the overhaul of fixed (industrial and non-industrial) assets, monitors the spending of funds for these purposes.
Takes part in the work related to the development and implementation of standards and specifications for the operation, maintenance and repair of equipment.
Gives opinions on rationalization proposals and inventions, on issues of improving the design of equipment, organization of repair work and maintenance of equipment, provides practical assistance to innovators and inventors and organizes the implementation of the accepted proposals.
Summarizes and disseminates best practices in the organization of repair and operation of equipment.
Keeps records and certification of equipment, buildings, structures and other fixed assets of the enterprise, makes changes to the passports after their repair, modernization and reconstruction, draws up the necessary technical documentation and maintains the established reporting.
3. RIGHTS
The engineer has the right:
3.1. Request and receive necessary materials and documents related to the activities of the engineer.
3.2. Enter into relationships with departments of third-party institutions and organizations to resolve operational issues of production activities that are within the competence of the engineer.
3.3. Represent the interests of the enterprise in third-party organizations on issues related to its professional activities.
4. RESPONSIBILITY
The engineer is responsible for:
4.1. Failure to fulfill their functional duties.
4.2. Inaccurate information about the status of the work.
4.3. Failure to comply with orders, orders and instructions of the head of the Company.
4.4. Failure to take measures to suppress the identified violations of safety regulations, fire and other rules that pose a threat to the activities of the enterprise and its employees.
4.5. Failure to comply with labor discipline.
5. WORKING CONDITIONS
5.1. The engineer's work schedule is determined in accordance with the Internal Labor Regulations established by the Company.
5.2. In connection with the production need, the engineer is obliged to go on business trips (including local ones).
6. RIGHT OF SIGNATURE
6.1. To ensure his activities, the engineer is given the right to sign organizational and administrative documents on issues that are part of his functional duties.
Familiarized with the instruction ___________________/_________________/
(signature)
