Cages for chickens at home. We make cages for growing chickens with our own hands

A brooder is different from cages for adult birds. Keeping young animals has its own characteristics, which must be taken into account in the construction of portable and stationary structures.

Stages of work:

Prepare elements of the frame, consisting of wooden bars. To the desired height of the walls, you need to add 10–15 cm for the installation of legs.
Assemble the cage frame from bars and metal corners.
cut out of plywood or metal mesh canvases corresponding to the dimensions of the back and two side walls of the house.
Attach to the wall.
Make a floor from a grid and fix it. Stuff a threshold 10–15 cm high on the front wall.
Assemble the frame for the door.
Sheathe the frame with polycarbonate or fix the glass.
Install door hinges.
Drill holes for ventilation, water supply, electrical wiring with a crown or drill, install a lamp holder.
Install the door.
Cut and attach the ceiling.
Install a hook or latch to hold the door open.

If a portable cage is needed, the best choice there will be a folding roof with a visor. It is made according to the same principle as the door. If the cage is large, the lid is made removable. This will make it easier to care for the interior of the house for young animals.

Materials for building a cage

A stationary or portable cage for chickens is otherwise called a "brooder". From several brooders installed one above the other, they form a "battery". This design is completely stationary, but each cell in it can be portable.

The best materials for making a do-it-yourself hen cage with chickens:

wooden bars;
moisture resistant plywood;
polycarbonate;
metal meshes;
stainless or galvanized steel.

Polycarbonate is good because it does not absorb odor, is moisture resistant, does not rot, and is easy to clean. This material is difficult to damage not only chickens, but also adult chickens. Building metal houses is practical, but expensive. The most economical option is to use plywood and polycarbonate.

The floor in the brooder is made of metal and it is important to choose the right section of the cells. Many novice poultry farmers make the mistake of purchasing a 10x10 mm mesh. This section is unfavorable in several ways:

litter lingers on the grid, which dries up and is difficult to clean off;
chickens begin to peck litter, which is unfavorable for their health;
a cage with such a floor requires more frequent cleaning, which complicates housekeeping.

The optimal choice is a mesh of bars with a thickness of 2 mm and a mesh section of 12x20 mm. It is convenient for both cleaning and moving chickens.
And also, novice poultry farmers make another mistake by installing wooden lintels under the grid that reinforce the structure. Litter accumulates on these bars, which is difficult to clean out from there.
The wood absorbs moisture and odor, begins to rot over time, and the wood is also colonized by bacteria. Chicks begin to peck at the bars and the risk of disease in young animals increases.
For the construction of cages, boxes and shields from old furniture are used, any suitable waste material. All parts must be free of nicks and chips, disinfected.

Chick cage sizes

The dimensions of the bird houses are chosen depending on the purpose and method of keeping. If you plan to take the brooder outside, its dimensions and weight should be such that it can be easily lifted. A portable cage for chickens is equipped with a visor that prevents rain from entering the interior.

The most convenient size of stationary cages for chickens:

facade length - 150 cm;
depth - 45–50 cm;
height at least 40 cm, optimal - 45 cm.

When choosing the dimensions of a house for young animals, it is important to take into account the fact that not only the floor area is important for the proper maintenance of chickens, but also the volume of intracellular space. Practice has shown that when the height of the cage is below 40 cm, the birds experience inconvenience. Mobile houses are made smaller in length by 1/2 or 1/3.

When designing a brooder, it is important to draw up a drawing indicating the dimensions of each part. This will help in the future to make several identical cells and build a stable battery out of them.

Requirements

The most important thing is to create the conditions in the chicken coop that are necessary for productivity. poultry and young growth.

The main function of the cell is to protect against small and large predators. For this purpose, the structure is made of metal or wood and mounted on supports, between which a litter tray is placed.

For keeping chickens, you can make a cage that will simultaneously perform the functions of stationary and portable.

There are several options for the most convenient designs, among which the household owner can choose the most convenient for himself.

How to make a cage for chickens the most convenient for the bird and for the owner will be prompted by the recommendations of experienced farmers and livestock specialists.

For stationary cages, automatic feeders and drinkers are convenient. For portable houses - homemade or purchased containers. If everything is done correctly, from the choice of materials to the assembly of the structure, the cage will last for many years.

The conditions under which broiler hens should be kept are completely different from those in which laying hens are kept. To obtain great amount eggs, warmth, a secluded place and darkness are required. But cages for broilers should be very light and spacious enough.

Benefits of cage content

Many poultry farmers know that it can be done in several ways: conventional floor and cage. On large farms, chickens are usually kept in spacious rooms on a changeable litter. It is replaced after each game.

But at home, such cultivation of broilers is unacceptable. Therefore, many owners are thinking about how to build cages for broilers with their own hands. Drawings of such buildings are understandable even to novice poultry farmers. Cellular cultivation in this case allows achieving certain success. In small bright houses, chickens gain weight very quickly. In addition, it allows you to keep the birds clean, as well as save on feed. It is worth noting that the increase in meat in chickens belonging to the first category is almost 95%.

What should be the cell

Before you start building small houses, you should figure out what cages for broilers should be. First of all, they should be convenient in terms of maintenance. IN Lately on large enterprises using fully automated cells. Such houses are equipped with a feed supply system and, of course, water. In addition, they have a more functional shape of the battery. It is worth noting that it will not be difficult to make such cages for broilers with your own hands. After all, this design allows you to save on feed, bedding and space. On this moment There are several types of such cages: KK-10 for ten heads, KK-20 for 20 heads and KK-30 for 30 broilers.

Such houses are made mainly from the grid. This allows you to constantly monitor the chickens. At the same time, birds have free access to water and feed. When building cages, it should be borne in mind that broilers do not need a lot of space. In winter, it is better to keep up to 10 goals per square meter.

When creating a cage for broilers with your own hands, it is worth remembering that this type of bird should be kept in not very spacious houses. After all, the main task is to build up meat, as well as rapid growth. Therefore, housing for broilers should be light and small.

In addition, the cage should be made more durable, as the number of birds per square meter increases over time. If you are doing self-manufacturing mesh, then the structure during welding should be strengthened with additional points. When building a cage for laying hens, you can use boards 1.5 centimeters thick to equip the floor. For broilers, this option is not suitable. The floor of the structure is best made of boards 2 centimeters thick. It is worth remembering that with sufficient care and quality nutrition, the weight of one bird can be more than five kilograms. Naturally, the load on the floor increases over time.

As for the mesh, it is better to take a product with fairly large cells (cell size 4-7 centimeters). In addition, their cost is much lower than the cost of a grate designed for laying hens.

The roof is best made from those materials that do not allow moisture to pass through. In this case, the roof must be qualitatively attached to the structure.

Making poultry houses

How to build cages for broilers with your own hands. Drawings in this case greatly facilitate the work. From them you can immediately see how much material is needed. So, for the cell you will need:

Of course, do not forget about the arrangement of cells. It is better to install a drinker with a nipple. This will reduce the cost of bedding and keep the water clean for several days. As for the feeder, it should be mounted on brackets. In principle, everyone can make cages for broilers with their own hands. The main thing is to follow all the rules and some recommendations.

What needs to be installed in the cage

If you have made cages for broilers with your own hands, then you can start equipping them with various useful devices. First of all, you should think about drinkers. For their manufacture, you can use ordinary plastic bottles equipped with a nipple. At the same time, they should be placed slightly below the head of the broilers. Otherwise, they will be uncomfortable drinking.

For the manufacture of drinkers, it is better to use containers with a volume of at least five liters. This will allow you not to worry about the availability of water for birds for several days. In addition, in the place where the shelf is fixed, it is worth providing a more reliable fastening of the entire structure. After all, as a result of constant loads, the mesh can be deformed.

As for the feeders, they should be installed so that only ¼ part is inside the cage, and the rest is outside. This will allow them to be easily cleaned and filled with fresh food.

It is best to make feeders from plastic pipes, the diameter of which is 30 centimeters. Fastenings should be done along the entire length.

That's all, homemade cages for broilers are ready.

DIY chick cages must fulfill many functions. It is a reliable house, protecting from predators, warm and bright.

For him, they choose suitable structures made of lightweight material so that there are no problems in their movement, and cultivation is convenient for both the owners and the inhabitants of the structure.

Growing an adult feathered individual is a rather laborious process. They are subject to many diseases, like any living creature. In order for the rapid growth of chicks to occur, certain conditions are necessary for them.

Breeders, first of all, get acquainted with the materials for making a place for them to live, make their own cages for chickens, and the drawings were long ago developed by the owners, who went through the process from the moment the chick hatched from the egg to the time of productivity.

Many little things need to be provided for in the design, first of all, this is a site with sufficient heat and light, easy mobility. At any moment it will be necessary to move the cage to a safer place.

They settle a certain number of inhabitants of one house, do not overcrowd it, so that the dwelling is free, accessible for the penetration of heat and light, since, having felt a slight cooling of the space, the chicks will begin to worry, climb on top of each other, from which their death occurs.

If the owner assumes a small plant, a compact, wire structure will suit him.

The bottom is not mounted in it, since it serves as a temporary haven for walking, protecting it from attacks by other courtyard inhabitants. Chickens are moved to favorable areas, and in the evening they are in.

With a serious plant of the younger generation, they produce other cages for chickens with their own hands, the dimensions and drawings of which differ significantly in volume. Easily removable pallets are constructed, which serve as the bottom in the structure and allow you to quickly remove life support waste.

It is possible to place 50 chicks on one square. After the expiration of 45 days, they are relocated to another place of residence intended for adults.

What material is the most suitable

Every breeder strives to reduce material costs in his venture of building a chicken coop for chicks.

On this basis, all work is carried out independently, although there is no shortage of ready-made models on the market.

Depending on the calculations and assumptions for volumetric breeding of birds, materials are selected, and an approximate scheme of the future bird house is outlined.

There is no clear definition of what material is most suitable for buildings, the owner decides for himself what is acceptable to him.

metal structure

For a warm seasonal period with a small brood, a metal cage can be used. Her design features allow the construction of homegrown craftsmen, it is not difficult and does not require special knowledge.

For this you will need:

wire mesh, preferably galvanized
aluminum wire
construction tape measure
scissors for metal

The following actions are carried out in stages:

galvanized mesh is sectionally cut to the required size
sidewalls - 2 pcs
end parts - 2 pcs
roof - 1 pc.
cut the wire into pieces of 4 cm
fasten the structure in the form of a box
Lid locks on one side for easy opening

The cage is mounted as needed with or without a bottom. The bottomless version can be folded after walking and transferring the chicks to spend the night.

Construction with parts made of various materials

It is more difficult to carry a cage made with heavier walls made of boards or plywood. Such a box is easily assembled, it is convenient to use, it is easy to pick up improvised materials stored in the bins of private farms.

Need to cook:

measuring tool
device for sawing elements (jigsaw, saw)
metal cutting device
a few nails, screws, self-tapping screws
galvanized iron sheet
floor mesh
plywood, chipboard

Start making a bird nursery:

according to the markings, according to the drawing, they cut plywood for the end walls and the roof
for the front side, a piece is cut from the wire mesh, the chicken house is easily visible through it, the accumulated vapors from food and processed waste are ventilated
the box is hammered together with nails, screws, fastened with fixing parts
build floor space from fine-mesh material
a galvanized plate will be needed to make a pallet with its subsequent location under the floor
screw on the flip cover

If boards, bars are used to make walls, then this makes the building heavier.

Its transfer is possible with an assistant or cages are used on warm, sunny days with the movement of pets from one establishment to another.

In practice, such a procedure is not surprising for a small number.

When the plant is massive, more convenient facilities are provided, with birds staying in one place for a long time.

Stationary buildings

In battery cages, with a tiered arrangement, young animals can be placed in large numbers. You only need a small room, well heated and ventilated.

For the arrangement of a multi-storey chicken house, materials are prepared, consisting of:

galvanized metal sheets
plywood layers
wooden blocks
wire mesh
elements for fastening

Perform the procedure:

carry out cutting according to the drawings from prepared materials
the frame is manufactured using cut-to-size bars
plywood is attached to the frame walls
fix the mesh floor
sheets of metal are cut for pallets into the required amount
roofs are made of wood
boxes are fixed to the side open wall, playing the role
fasteners of parts are performed gradually, starting from the lower floor and attaching subsequent houses to the top
attaching wheels to the bottom platform will allow you to move the structure

Feeders and drinkers are needed for any cage design. Chickens constantly eat and drink, only in this way will the intensive growth that every breeder of young animals strive for be ensured.

Conditions for the proper keeping of birds

Making a good bird house is an important moment, but in order to bring to the final result and grow an adult from a chicken suitable for performing its functions, you need to properly equip their habitats.

In order for the chicks to feel at ease, it is necessary:

Make the cages comfortable. If there are no factory-made products for the first time, home-made ones will come in handy - from plastic bottles with nipples. You can turn a jar filled with water into a bowl, the liquid will penetrate into the vessel at a sufficient speed so that the chickens have time to empty it. With a similar function went on sale industrial products they are very convenient to use. The owner of the poultry farm is only required to constantly monitor and fill the empty container, and perform plumbing duties.
Arrange for the inhabitants comfortable devices for feeders. They are arranged with a half ledge in the cage, the rest is outside it, then it will be convenient to fill the feed and clean the device. The craftsmen cut the pipes in half and screw them to the floor cage base. can eat by sticking its head into a large cell, the food is not scattered, it is economically used without trampling by paws.
Careful maintenance is one of the main conditions for pets to be healthy and grow well. For this purpose, a pallet is installed under the floor of each living box. Litter, feathers, household chicken garbage fall through the mesh cells. Pallets are cut independently from the available material, purchased at the store if the cage is made in accordance with typical dimensions, and not according to the scope of the master's imagination. They can be built from metal plates, cut out of plywood, wooden non-liquid boards. Having made a frame crucifix according to the size of the cell bottom, they clog or seal the hole, pull an oilcloth or other elastic material over the plank covering. Provide easy access to it for free cleaning of waste.
The need for proper lighting is an undeniable fact. With the help of light, small inhabitants will be able to eat and drink, communicate with their neighbors. The light warms them, soothes them in the first days of life, so you need to choose and correctly place its sources.

Important Growing Points

Of course, nothing can replace a mother hen with greater efficiency, but there are examples of farms that properly equipped cages and raised healthy offspring.

For this you will need:

the correct temperature regime so that the kids do not randomly look for warmth on each other and, as a result, choke
cool houses will reduce the appetite of the inhabitants, hot ones will increase thirst, reduce the mobility of young animals
from rational heating, chicks quickly gain weight, as they eat right, move

Regular supply of chicks with water, vitamins will allow you to grow healthy offspring.

The effect of light on the health of young animals

Physiologically, the bird is very sensitive to light illumination.

It has good visual acuity, but only in a bright space, completely blind in the dark.

This is used by breeders to regulate feeding, hen activity, wake and sleep times.

By the intensity of light fluxes, the farmer can achieve:

improved search for water and food for diurnal
reduce emergency situations
height increase
weight gain
provoking molting in adults
control over the development of pullets

In addition to the above, breeders in the poultry house operate with temporary illumination in order to observe the process:

quantitative food intake
puberty with the onset of egg production
V summer period the heat produced by the birds is regulated

Diligent business executives make up a lighting program, which includes various blocks with intermittent or continuous darkness.

Growing broiler chickens or taking place with different programs, but it is necessary to provide a dark period so that bone tissue is formed, calcium is exchanged, and immunity is developed.

The maintenance of a bright poultry house takes place with great convenience - this is also useful for its inhabitants. If the chicken coop is large, then arrange lines of lamps.

When chickens are raised in cages, the installation of lighting fixtures is carried out in the aisles at a height sufficient to easily change burnt out lamps and at the same time they should not interfere with movement.

Light illumination in broilers and laying hens differs not only in duration, but also in intensity. Daily chicks of all kinds need constant brightness, with long daylight hours - this helps them quickly adapt to the world.

Round-the-clock lighting is provided for the chicks of the first 10 days. Then the light is reduced and at 2 months, 10 hours of light is sufficient until the chicken matures and begins to rush.

How to properly heat

Facilities for optimal heating are provided by the following methods:

Arrange powerful lamps or reflectors with a metal mesh. In the cells, instead of the ceiling, devices with incandescence up to 60 watts are placed.
To reduce the consumption of electricity, a container is placed in the cage, wrapped in material with water heated to the standard, which is constantly changed when it cools.

The temperature in the house is monitored with a thermometer. In the first days of a bird's life, it should be equal to 33 degrees. After 10 days, it can be reduced to 26 degrees. The decrease takes place after each week until reaching 18 degrees.

After five days of chicks growing up, the cages with them can be placed in the air for walking. The action of sunlight is also beneficial for the health of chicks, because of the vitamins produced in the body, they do not develop rickets.

Cells are placed in places with sufficient illumination, with the ability to move it in time to the shade.

Chickens are walked if the weather is sunny and calm, in cold and damp conditions, the chickens are kept in the hen house until they are 2 months old.

How to create good conditions for a walk

When the time has come for the young to walk comfortably, they, of course, are not allowed out of the cages onto the green lawn.

Without a strict guide mother, they will scatter in different directions, because the hatchery chickens were not brought up.

A box knocked together in accordance with all the rules of cell building from any material and taken out with chickens in the sun may not please all the inhabitants.

From the cracks or through the mesh, air currents enter, which are unusual for the chicks, forming drafts with a negative impact.

Cells still need to be taken out in without fail. The walls are covered with non-woven material, fixed on the surface polyethylene film. With these methods, the chicks are protected from cold currents and predators in the resulting simplified aviary.

Such a device is easily transferred to the right place in order to increase the flow of sunlight or protect the chicks from them in the shade - the need will be visible from the behavior of the kids.

With their loud chirping, they will tell them it's hot or they have a desire to drink, from the cold they will huddle together.

Birds, like people, have new diseases, scientists develop drugs to cure them. Only careful care, observance of lighting and heating regimes, the use of good food along with vitamins can eliminate mass mortality,

Every retailer of feather nutrition knows what chickens need to take at any stage of growing up. In addition to funds mass media he will advise on any issue related to the plumage and good maturation of the bird.

Compliance with the rules in the construction of cages, the cleanliness of poultry houses, fortified nutrition is the key to the health of pets. A labor-intensive cultivation procedure, the owner will turn into an abundance of delicious eggs and meat.

You can watch the video on how to make a summer cage for chickens:

Rabbit breeding at home: cells and their types

Making bird feeders with your own hands: ...

Little chickens, like any other living creatures, need care and protection. They need to be protected from bad weather - heavy rains and scorching sun, as well as from domestic and wild animals that can attack. Depending on the number of chickens in the flock, the format of their maintenance is determined, but the best of the existing options is rearing in cages. This approach to keeping allows you to avoid problems associated with overheating of the bird and its freezing.

Depending on how many chickens you plan to start, the type of cage is also selected. It can be mobile portable or stationary fixed. The portable cage is more suitable for a small number of chicks. Its main advantage is the ability to move around the entire plot, depending on the position of the sun. But for growing large livestock, you will have to use multi-tiered batteries. This is the name of multi-cell cells installed on several floors.

Before dealing with the requirements put forward to the cages, let's say a few words about the room for their installation.

And now it's time to talk about the ideal cage. As already mentioned above,
raising chickens can occur in two ways - cage and floor. In large farms, where the number of birds is in the tens, if not hundreds, it is important to grow on a removable litter, and in the household, the cellular content shows itself perfectly. In small and comfortable houses, the bird will begin to rapidly gain mass, while there will be no problems with maintaining cleanliness in the cage.

The poultry house or barn in which the cage will be placed must be electrified, because in the first weeks of life, young animals will need a large number of Sveta.

So, what should be the ideal cell? Firstly, it is convenient for the bird and comfortable to use. Automated models equipped with special feed and water supply systems show excellent results. In such cages, cultivation is many times more intensive, since the bird is provided with sufficient food at any time of the day or night and, as far as hygiene and cleanliness are concerned, are in ideal conditions.

The photo below shows one of the models of automated cages. Another huge advantage of them is the ability to save free space in the room by forming batteries. Also, automation allows you to save on feed, because the bird does not have direct access to it, thanks to closed feeders, which means that it does not scatter or trample the remains.

But not every household brings such a large profit that could allow the purchase of automatic cages. This post provides photos of homemade cells, and at the end of the post you can watch a video tutorial on building cells. Know that it is not difficult to make a structure for keeping day-old chicks with your own hands.

To do this, you do not have to purchase complex tools or learn new ones. technological processes Everything is handmade at home. Perhaps one of the most important stages is the drawing up of drawings. The presence of a graphic image of the future design will greatly simplify the workflow. Remember that drawings can only be made if there is complete information about the breed being bred and the number of individuals prepared for breeding. Also, if you use various video tutorials, look for reliable sources of information.

Strong materials should be selected for the cage, because chickens will not always be
tiny, they grow very fast. You can initially make drawings with an eye to the need to strengthen the cells, or leave this moment for the future, because you can strengthen the structure at any time.

If you are selecting materials for future construction, please note that the flooring must be at least 20 millimeters thick, and the walls will be half solid and half cellular.

DIY manufacturing

As mentioned above, making a cage for growing yellow babies with your own hands will not be difficult. To do this, you need a sheet of plywood, metal plates, wire mesh, wood slats and screws. It is preliminary recommended to watch the DIY video tutorial at the end of the recording.

If you don't want to watch the half-hour video, but would like short and clear instructions on how to make your own grow cage, use the instructions below.

Step 1. 6 racks are made with dimensions of 7x2 centimeters, each 165 centimeters long.

Step 2. A frame is formed from the racks with the help of rails. For this, 3 slats with a section of 10x2 centimeters, 6 slats with a section of 3x2 centimeters, and 2 slats with a section of 5x2 centimeters are used. The length of all rails is 140 centimeters.

Step 3. For the safe rearing of chickens, the side walls must be made of plywood, using 9 pieces with dimensions of 30.5 centimeters by 57.5 centimeters.

Step 4. Metal plates from the list of necessary materials for building a cage with your own hands will be needed to create pallets in which garbage and litter will be collected. The dimensions of these pallets are 30.5x67x20 centimeters.

Step 5. The dimensions of the roof for the cage are 140.7x70 centimeters.

Step 6 You can make drinkers and feeders from the remaining metal sheets. Here is a tutorial video to watch. If there is no desire to deal with this moment, feeders and drinkers can always be purchased separately. These elements are fixed with brackets.

Step 7. The open part of the cage should be formed from a mesh so that the birds have free access to the feeders.

Video “Homemade cage for chickens”

In the recording, a man demonstrates a finished cage, which he made himself at home.

Many people want to do subsidiary farm. Always good to have on your desk fresh vegetables and meat. In addition, all hand-grown products will definitely be useful, because they do not contain chemistry and various harmful additives. But in order to grow a hundred, you need to make an effort. For example, in order to raise chickens, you need to make them cages, a paddock and properly care for them. This article will discuss how to make a cage for chickens on your own.

Features of keeping broiler chickens

Broilers are a special and rather difficult type of chicken to grow. The way it is kept is different from the usual. If chickens need a lot of space, little light and no drafts, then broilers need the opposite. Cages for chickens of this breed should not be too spacious. At the same time, they are well ventilated and let in a sufficient amount of light.

You should also carefully choose a place to install cages for chickens. Here you need to consider the following factors:

warm and dry. Broiler chickens grow well under certain temperature conditions. So, a daily bird should be kept at a temperature of 34 degrees. If the chicken is a week old, then the degree can be lowered to 30. That is why in the first days of life the bird must be heated using any device. Often, lamps or electric heating pads are installed on the cage (top).
a lot of light. The first month the cage should be illuminated around the clock. Then the lighting time can be gradually reduced. Upon reaching 16 hours of daylight hours, the decrease in illumination stops until the slaughter.
correctly place the feeders and drinkers. As a rule, they are located at different ends of the cell. So the bird will not spend a lot of energy on moving.

In addition, when growing broilers, you need to properly feed the bird. She should receive all the necessary vitamins and a sufficient amount of nutrients.

If you have made the decision to grow broilers, then you will definitely think about where to get the cages. On sale you can find ready-made options. But they will cost quite a lot, so many prefer to do everything with their own hands. The manufacturing process is quite labor intensive., but, having stuffed his hand, everything will go "like clockwork."

Before you start making cells with your own hands, prepare necessary materials. For work you will need:

plywood sheet. It will play the role of the basis of the entire cell (sex). Since broilers are quite heavy birds, the sheet thickness should be at least 20 mm. But even such thick plywood must be reinforced with slats.
wooden beams. Of these, the frame of the future house for chickens will be made.
net. It is necessary for the construction of the open part. The grid should have cells 70 by 70 mm.
screws, nails, brackets, corners.
a set of carpentry tools, a screwdriver, a screwdriver.

The size of the cage will depend on the number of chicks. Broilers are grown in a cramped room, so large sizes do not need to be done. As a rule, up to 5 birds are placed per square meter. And if it’s a cold season outside, then the number of chickens increases up to 10 pieces per square meter.

The first step is to make a frame of bars. The height of the cage is no more than 40-50 cm. A sheet of plywood is attached from below and reinforced with slats. The lower half of the rear and side walls are also covered with plywood. The top and the rest of the sidewalls and the back wall are closed with a mesh.

The front part is equipped with a feeder and drinker mounted on brackets. And its upper part is made of mesh in the form of a door. The dimensions must be sufficient to reach a healthy bird.

If most of the birds are grown at once, then you can do multi-cell rack. A common frame is made (more powerful wooden blocks are used), and then it is divided into several cells. This method can significantly save space in the barn.

To facilitate maintenance, you can make a floor from a fine metal mesh. In this case, the litter will be poured into the equipped bottom tray, and then removed. In this case, the mesh must be reinforced with intersecting wooden slats or metal rods.

Chicken cage equipment

Broilers need special care, as mentioned earlier. Therefore, the cage needs to be further equipped. In addition to feeders and automatic drinkers, you need to consider installation of heating and lighting devices.

Very often, powerful incandescent lamps with reflectors are installed in the back (or on top, if the cage is not included in the block). Such designs give a sufficient amount of light and at the same time heat.

In the hot season, incandescent lamps can be replaced with fluorescent ones. They will give a sufficient amount of light, while not generating heat.