Business plan for the production of chain-link mesh. Own business: production of chain-link mesh

Nowadays, most summer residents prefer to use to fence their plots and logically distribute the area into sections.

The chain-link mesh is an invention of engineer Karl Rabitz, who at one time came up with the idea of ​​using rolls of knitting wire to create a spectacular, very convenient and at the same time quite cheap fence.

1 Features of mesh and wire

Chain-link mesh is a special type of mesh made from braided wire. The wire is taken thin, with a diameter of up to 3 mm. Most often, samples with a cross-sectional size of 1-1.5 millimeters are used.

The wire is knitted on a special machine, intertwined into a mesh with rectangular cells of a certain size.

The benefits of using a chain-link mesh are obvious. Its weight is quite low, you can mount the structure with your own hands. The wire consumption is relatively small, it is easily determined and does not hit the pocket.

At the same time, the fence performs its tasks. Its dimensions are sufficient to qualitatively protect the site from the street, thereby protecting your space from unwanted guests, animals, etc.

They use it for a wide variety of tasks, ranging from fencing pens with animals, and ending with full-fledged fences at security companies.

The wire itself plays an important role. It is the only and main component of the grid, so its characteristics, dimensions and thickness have a huge impact on the final result.

See also: what are the benefits, and where can it be used?

In terms of the cross-sectional diameter, as we have already noted, rather thin samples are selected, their thickness rarely exceeds 2 mm.

For a large-sized mesh, the use of which is reasonable at military or industrial facilities, thicker models can also be used, but in civilian conditions there are no particular advantages from it, and the production price of a thick chain-link mesh is much higher.

1.1 Coating

The second point is coverage. The coating of the wire affects how long it will last in operating conditions.

According to the type of coating, the wire for the fence chain-link is:

1. Black.
2. Polymerized or plasticized.

Black is the wire for the fence, untreated. It is cast from black steel of a standard grade. This steel is very good and perfect for fastening the fence, if not for its poor resistance to corrosion.

The fence mesh made of a black sample of wire will begin to rust in a few years, and in a dozen it will completely rust. Not that it was a very big problem.

The fence will not crumble due to rust, but it will lose its presentation, as well as the initial strength indicators.

Galvanized mesh wires are the simplest and most effective solution. Galvanized mesh withstands the influence of external factors longer, less likely to corrode.

However, galvanized products will also begin to break down over time, but much later. But it is more durable, not inferior to the first option in strength and does not cost much more.

Polymerized or plasticized mesh is the most popular and convenient option. Here, steel wires are coated with polymer compounds, forming a kind of protective sheath.

2 Manufacturing

Many are interested in whether it is possible to create a chain-link type grid with your own hands. After all, modern manufacturers have managed to use a minimum of equipment and materials for such tasks.

Indeed, in order to form a high-quality mesh, huge workshops and production lines are not needed. It is enough to have material and a single quality one.

Do not weave a chain-link by hand. It is a hard, ungrateful, and monstrously slow mode of production.

See also: in which companies can I order?

It is much more reasonable to use modern automatic or semi-automatic, where the process comes down to cutting wires of the desired length, feeding them to the machine, and then weaving in the right order.

This work is performed by the machine operator. During a shift, he makes several tens of square meters of a grid with cells of 50 × 50 mm. It is impossible to give exact performance figures, because much depends on the type of wires, the efficiency of the machine, the size of the cells, the efficiency of the operator himself, etc.

2.1 Chain-link production on a semi-automatic machine (video)

2.2 Material consumption

The consumption of material is quite easy to detect. For this, there is a clear and easy formula that allows us to understand quite accurately how much product is needed and how much it will cost us.

The formula is based on the ratio of several indicators. The nominal weight of the raw material for the grid, the size of the mesh cells (the size of the cell directly affects the consumption) and the diameter of the wire are taken into account.

So, consumption formula for 1 square meter of chain-link as follows:

13.40 * D 2 /A, where

• 13.40 - a constant coefficient corresponding to the consumption weight;
• D 2 - wire diameter squared;
• A - cell size (if the cell is 50 × 50 mm, then we write 50 in A, if 35 × 35 mm, then we write 35 in A, etc.).

The result is the weight of the wire, or the weight of the roll, that must be used to form a 1 square meter netting of the required dimensions.

For a standard chain-link intended for use in civil conditions with a cell size of 55 × 55 mm, the weight of the material used, and therefore its consumption, is 0.6 kg per 1 m 2.

Woven mesh netting with cells 50×50 mm

According to such a simple, but at the same time effective scheme, you can easily determine the weight and consumption of any kind of chain-link.

2.3 Manufacturers

Weaving a chain-link is permissible and profitable only if you are absolutely confident in your abilities and clearly understand why you need it.

Buying even a manual machine is a serious investment. They will not pay off as soon as you might like.

That is why for tasks that are trivial and small, it makes sense to simply turn to well-known manufacturers and buy products of the quality you need.

Fortunately, there are more than enough manufacturers on the market. The chain-link weaving process is so simple that there are factories for its production in almost every major city.

• UkrTransMetal;
• PE "Metizy-94".

The former are engaged in large-scale production of a huge number of metal and wire products, ranging from knitting collars for fittings to full-fledged fencing sections.

The second ones are less popular, but they offer their products at a lower price with excellent quality.

Chain-link wire from these manufacturers is very high quality and durable, sold in a huge number of varieties.

2.4 Mounting

An interesting point concerns the fastening of the mesh as a full-fledged fence. For fastening use different ways. The choice depends on your desires and working conditions.

So, the easiest and at the same time very effective way is to plant a chain-link in advance. Fasteners in this case are made from cheaper or special fasteners.

If the situation requires it, then a hard wire or thin fittings are passed along the lower and upper parts of the cells. It will stabilize the plane of the fence, making it much more stable.

The second mounting option is the installation of separate sections, where a pre-cut chain-link is attached to a full-fledged section consisting of a metal frame, and then, as an integral element of the fence, it is planted on ready-made monolithic poles.

This design is considered much more mobile, it is easy to repair and modify, but it will take more time to work, you may need the help of a welder. Which in turn increases the final cost of the fence.

In this article:

There are universal building materials for wide consumption, for which the demand never dries up. And the chain-link mesh is a prime example of this.

Demand for chain-link mesh, despite the seasonality, is quite high and stable. Another important plus of organizing a mesh production business is that you don’t need large capital investments to start, the production machines are quite compact, the finished mesh is rolled up, so this business will not require large production areas. To open a mini-workshop for the production of chain-link mesh, you will need about 300,000 rubles. But consider the organizational issues in stages.

Demand analysis and assessment of the market for chain-link mesh

According to estimates of consumption, about 90% of the total mesh produced is spent on arranging fences and other fences at construction sites, home gardens and summer cottages, and making aviaries for birds and animals. The remaining 10% is occupied by various needs of construction, agriculture, mechanical engineering, energy (reinforcement during plastering, screening of crushed rocks and building materials, strengthening slopes from embankments, making protective screens for ventilation shafts, protecting heating mains and pipelines, etc.).

The price of the grid and its application depends on such factors:

• cell sizes;
• material for manufacturing (black, galvanized metal, polymer coatings, stainless steel);
• wire thickness;
• roll sizes.

Before starting production, you should assess the demand for chain-link mesh in your region: take into account the quantity, approximate sales volumes, assortment (and the most popular items) from competitors, analyze existing offers and prices at wholesale building bases and retail stores.

The main channels for the sale of chain-link mesh (finished products):

1)Self implementation . The end consumer is individuals.

Pros: the ability to set the maximum margin.

2)Retail Stores (construction, economic). Oriented to summer residents, owners of country houses, private construction. The end consumer is individuals.

Pros: when concluding a sales contract with a network of retail stores, you can achieve relatively constant sales of products.

Cons: high markup of the store (about 30%), high competition, small volumes, sales that depend on many unpredictable factors (recommendations of the seller, the location of the goods on the shelf, attractive appearance);

3) Wholesale bases (companies selling various metal products). Focused on large orders, construction companies, industrial enterprises, retail chains. End consumer - legal entities of all forms of ownership, private entrepreneurs.

Pros: large volumes, saving time (no need to run around the shops, negotiate, sign agreements, etc.).

Cons: high competition, large, but irregular, mostly seasonal sales, which can be described in one phrase: "rarely, but aptly."

4)Direct sales to industrial enterprises (participation in tenders)

Pros: the ability to work "under the order", a guaranteed level of sales. Products are not stored in the warehouse, they are paid according to the contract, without vague terms of implementation.

Cons: it is almost impossible for a “newbie” in business to win a tender on favorable terms.

Of course, in theory, the best option would be to work out all the channels, but in practice, such a volume of work in a short time is not feasible. Therefore, the general recommendation is to start with retail sales, while simultaneously looking for alternatives, building up your own customer base.

Choice of organizational form and other legal issues

To open a mini-workshop, the optimal organizational form is an individual entrepreneur (IP). OKVED 28.73 - "Production of wire products". But the choice of taxation system depends on your target audience of buyers. If the end consumer is a private person, it will be most advantageous to choose a simplified taxation system. Enterprises prefer to cooperate with legal entities or individual entrepreneurs - VAT payers.

For the business plan, we will take into account taxation according to the simplified tax system - 15%. The tax base is income minus expenses (of course, all financial transactions for calculating taxes must be documented and properly executed).

The production of chain-link mesh is regulated by GOST 5336-80. According to the current legislation, manufacturers are not required to confirm the quality of products with the appropriate certificate. But in practice, the passage of voluntary certification and compliance with the requirements of GOST in production significantly increases the chances of a successful business.

Equipment for the production of chain-link mesh and a room for a mini-workshop

The main expenditure part of the organization of the production of chain-link is the purchase of machines that make the net. There are many types and manufacturers (on the network you can even find instructions on how to assemble the machine yourself from "improvised" parts). We will not delve into the delights of craftsmen, so we will consider two main industrial options: semi-automatic and fully automated machines.

semi-automatic- require the participation of an operator who controls the mesh manufacturing process. Advantages: small size, ease of setup and operation, low cost (35,000 - 40,000 rubles). Main disadvantage: despite the partial automation of the process, much has to be done by hand, incl. and mesh fold, which allows for a certain asymmetry in cell sizes and other minor imperfections.

Automatic– provide a fully streamlined production process that does not require outside intervention.

Advantages: high productivity, weaving accuracy, fast bending and minimal operator intervention (load the spool, remove the finished roll).

Flaws: a higher price compared to a semiautomatic device (from 200,000 rubles), the cost of repairs and maintenance, the need for special staff training.

To calculate the business plan, it is planned to purchase an automatic machine ACP15 / 2 worth 250,000 rubles. in the following configuration: machine, unwinding device, 2 sets of equipment (screw sleeve, coiling plate, receiving pipe), passport, instruction manual. The machine produces mesh in accordance with GOST 5336-80 in a wide range of mesh sizes (20-60 mm). The cost of equipment includes delivery, staff training and warranty maintenance throughout the year.

Additional expenses- purchase of racks for storing finished products, a receiving table, an operator's workplace worth 50,000 rubles.

Total capital investment for the opening of a mini-workshop: 300,000 rubles.

Before buying equipment, you need to select premises for production.

For the operation of one machine, 15 m 2 + 10-15 m 2 for storage of finished products will be enough. The main requirement for the premises is the presence of a 3-phase electrical network.

Description of the technological process

The machine performs all work on the manufacture of products in automatic mode. The operator is required to: load a wire spool, program the microprocessor according to certain parameters (wire thickness, mesh diameter, roll dimensions) and press start.

The wire from the reel is pulled to the area of ​​spiral formation with the help of an unwinder and guide bushings, where it is wound onto an auger (a working mechanism that twists the wire into a spiral for subsequent interlacing).

The wound spirals move to the guillotine mechanism, where the wire is cut. One of the ends of the wire is bent in the form of a hook (half the length of the proposed cell), the workpiece is pulled through the groove of a continuously rotating shaft and attached to the guillotine device.

The cut spiral is held by grippers, stretching under the influence of a suspended load.

Then, the machine winds the next spiral with the interweaving of the one that is held by the grippers, forming the cells of the chain-link mesh. After cutting off the newly formed spiral, the grippers release the held wire and the mesh is wound into a roll of the programmed length.

The mesh is processed with machine oil, the edges are packed in thick paper and the finished rolls are compactly folded into a place intended for storage.

Calculation of a business plan for the production of chain-link mesh

To calculate the profitability of a business, we will take as a finished product the most popular mesh for fencing with mesh sizes of 55 * 55 mm, made of galvanized wire 1.6 mm thick.

Revenue part

Machine productivity (for cell size - 55 mm) - 48 m 2 / hour. With one-shift work and 22 working / days per month, production volumes will be: 48 m 2 * 8 hours * 22 days = 8448 m 2 / month.

The standard mesh roll size is 15 m2 (10 m long, 1.5 m wide). That is, monthly production volumes from one machine will amount to 563 rolls.

Selling price:

• retail - 650 rubles / roll (30% of sales),
• wholesale - 450 rubles / roll (70% of sales).

Total income: (169 roll * 650 rubles) + (394 * 450) = 287,150 rubles / month.

Cost calculation

The raw material for the production of chain-link mesh is low-carbon wire (according to GOST 3282-74) without coating, galvanized or with a colored decorative polymer coating.

The price per ton of galvanized low-carbon wire with a tensile strength of 560-900 H / mm 2 and a diameter of 1.6 mm is 37,000 rubles.

Wire consumption per 1 m 2 of chain-link mesh is calculated by the formula: Mass (kg) \u003d (13.40 * D 2 / A, where 13.40 kg / mm is a constant coefficient; D is the wire diameter in mm; A is the cell diameter in mm.

According to this formula, the consumption of wire for a chain-link mesh with a cell of 55 mm will be equal to: (13.40 * 1.6²) / 55 = 0.62 kg.

The cost of the roll (based on the spent wire) \u003d (mass of wire * number of m 2 in a roll * mesh cost) \u003d 0.62 kg * 15 m 2 * 37 rubles \u003d 344.10 rubles.

Cost of 563 rolls (productivity per month) = 193,728.30 rubles.

Expenditure part

For an accurate calculation of expenses, from the difference between the profit from the sale and the cost of production, you need to subtract the wage fund for employees, utilities, electricity, rent and other costs that are calculated on an individual basis, based on tariffs, rates and agreements in each specific situation and for a certain area.

On the eve of the hot months, both literally and figuratively, enterprising people are interested in the so-called seasonal business. This is especially true for those who do not have a permanent job. “I have a typical story of a person of the post-Soviet era,” says a certain Sergey Ivanovich Konevodov at the Business as Survival forum. - I was an adjuster of powerful presses at a machine-building plant. The enterprise was closed. The chains were destroyed. And in their place a shopping center was erected. My profession is not in demand at all. Our town is not that degrading, but clearly not successful. Therefore, I use the summer to the maximum to earn good money. At the same time, I don't want to go to work. I am looking for a seasonal idea for a business with a minimum start, but with a guaranteed income.

We asked our expert Igor Malyugin, an analyst for the startup community, to answer this question. “If we talk about summer business with the least risks, then it is best to focus on construction and agricultural work,” says Malyugin. - To the universal products that you can start with a minimum start, I would include mesh netting". The expert justifies his position with a number of positive factors, which we decided to talk about.

Universal fence material

Looking through the forums and blogs has shown that there is a certain amount of frustration in the market for this product. “The competition is strong, so it is difficult to count on a large income,” the forum member Guest_from_the past is sure. “In general, people look down on the chain-link, they say, it’s not fashionable.” And there are a lot of posts like this.

Meanwhile, in the US, the production of this material is growing. Thus, the publication "Home construction" states that the chain-link mesh is still interesting to the consumer. "It's a great combination of price and features," writes journalist Mike Hopps of Home construction. - Protect the plantation from forest rodents and hares ... create an open-air warehouse ... start construction ... all this is accompanied by the construction of a mesh fence. Americans are too practical to spend money where they can save money.”

Indeed, a chain-link fence is three times cheaper than a corrugated fence, five times cheaper than a wooden board fence, nine times cheaper than a metal picket fence, and so on. “If we add to this argument the cost of time, then there is no competition in the chain-link,” says Mark Katz, an analyst at the ORFEI.ltd agency. - As for the skepticism associated with its production, it just has a seasonal limitation. This is a business for those who want to make money on the "summer".

At the same time, the expert warns that the factor of competition must be taken into account. For example, for a territory where up to 10 thousand people with average incomes live, one entrepreneur will be enough. On the other hand, the saturation of the market can be judged by the cost. In particular, a ten-meter roll (height 1500 mm) with a cell of 50x50 mm, made of galvanized wire 1.8 mm, should not cost more than 1000-1200 rubles for retail sale. “A higher price may signal a lack of normal competition,” Malyugin said. “Because the cost of this product for Russian conditions is unlikely to exceed 500-600 rubles per specified roll.”

Since the chain-link mesh is in demand, the machines for its production, given the relative simplicity of the mechanisms, are also represented by a wide variety. “There are good Ukrainian and Russian machines, there are also Chinese ones that are attractive in price, there is also advanced equipment from Italy, Germany and even New Zealand,” says sales manager Alexander Degtyarev from Moscow. - Remember that any seller will promise that the machine will work "normally". However, it would be reasonable to ask if there is a bending unit and how the winding on the pipe takes place. Second, you need to find out how much worm And "knives" and how easy it is to acquire them, since they are consumables. Third, when it comes to automatic machines, to what extent are the reliability problems of the spiral solved, that is, how often does it fly out? And what to do if the wire gets stuck in the cut?

A responsible approach to choosing a machine, including taking into account the opinion of those who have already worked on it, can prevent start-up errors. This is especially important when it comes to machines, as they are not cheap for a seasonal business. For example, an ASU-174M automatic machine will cost an entrepreneur 230,000 rubles, you will still have to spend money on the delivery of equipment, depending on the region, plus 50-55 thousand rubles will be spent on the purchase of the first batch of wire (1.5 tons). At the same time, the cost of a roll, which includes the salary of the operator and the rental of premises, will not exceed 500 rubles.

However, many entrepreneurs believe that they should start with a semi-automatic.

“Why immediately grab the machine gun? - forum member am0n writes. - A big investment of money, plus one more big minus: on the machine, of course, you can safely “smoke bamboo” and only shoot rolls on one condition: if you have good wire. Now the wire is made in such a way that from one skein 10 times you have to set up the machine, and the machine does not set up so quickly. To start production, and in general to probe the soil in this area, it seems to me that it is better to take a semi-automatic device. It is less capricious about the quality of the wire, and everything is set up much faster: in a minute you are working again. Yes, there is a minus that you have to stand at the table yourself, bite off and, if necessary, bend the ends.

In fact, many of the Rabitz mesh machines are low cost with relatively reliable performance. So, Chelyabinsk can be purchased for 45 thousand rubles, while it will be equipped with a weaving mechanism, a trigger pedal, a control unit connector, a wire unwinding device and replaceable pulleys and a screw sleeve with a knife. The manufacturer guarantees ease of learning, and reaching maximum performance within two weeks after the start of work.

Confessions of an Entrepreneur

In RuNet we found a story about mesh production Rabitsa"from scratch". It was told by a certain MeXaHiK on the forum, which was called “Own Business”.

Sincerely, Victor!!!"

Igor Malyugin believes that this story accurately characterizes the chain link mesh business. “This business can be successful if the entrepreneur has the skills to repair and adjust equipment, as well as natural diligence and a bright head,” the expert is convinced.

In this material:

Chain-link mesh is in demand in such activities as construction, landscape design, and energy. This material has a wide range of applications and low cost. Therefore, when looking for a direction for entrepreneurship in the manufacturing sector, you should pay attention to the business idea of ​​making a chain-link mesh.

Description of the business idea, its relevance

The advantages of this type of business include

• low entry threshold;
• lack of seasonal demand;
• availability of raw materials
• small monthly costs of the enterprise.

Due to the relevance of using this material everywhere, the chain-link mesh production business plan developed and presented below is suitable for almost any region of the Russian Federation.

Mesh production technology

Understanding such a type of business as the production of chain-link mesh is not difficult, even if the novice entrepreneur does not have experience in the manufacturing sector.

To start manufacturing products, a coil with wire is placed in a special machine, after which the type, size of cells, and length of the roll are set. After setting all the product parameters, special equipment is turned on, unwinding the wire from the coil and twisting it into a spiral for weaving, then the machine cuts the spiral and bends special hooks at the end, winds one spiral onto another, forming a mesh of the required length.

After turning off the machine, the finished roll is covered with a special oil to protect against corrosion, packed and sent to the warehouse.

Market and competitor analysis

Chain-link mesh enterprises are present almost everywhere due to the simple technology and good demand.

Before starting activities in this area, one should assess the potential of the region, the possibility of building a sales system, and the presence of direct competitors.

organizational plan

Business registration

To register an activity, you need to register an individual entrepreneur or LLC and work according to the traditional taxation system, since enterprises, most of which are VAT payers, will become buyers.

To register a business, you will have to take a package of documents to the tax office. To open an organization, the minutes of the meeting of founders, the charter in two copies, an application in the form P11001, a decision to establish a limited liability company, a letter of guarantee from the landlord, and a receipt for payment of the state fee in the amount of 4000 rubles are provided.

In the case of an individual entrepreneur, the list of documents will be much more modest - a copy of the passport, an application in the form P21001, a receipt for payment of a fee in the amount of 800 rubles.

After receiving the registration documents, the next step will be opening a bank account and finding a suitable production facility.

Rent of industrial premises

This production technology requires oversized equipment. When operating one machine, a simple garage or a production facility with an area of ​​15 square meters or more may suffice. If serious production volumes are planned, a room for equipment from 50 square meters and a warehouse for materials and finished products from 30-40 square meters will be required.

The location of your own production can be found in the industrial zone of any region, it is better outside the city, since rent will be cheaper there. Considering the dimensions of the products, it is better to take care of the possibility of entering the production for counterparties (suppliers and buyers).

Renting a production facility with an area of ​​70-100 square meters in an industrial area on the outskirts of the city will cost 15,000 rubles per month.

Equipment

The issue of purchasing equipment must be approached responsibly. The modern market offers a large selection of machine tools, both imported and domestically produced. Today, Russian, Ukrainian, Chinese, Italian, German and even New Zealand suppliers are represented on the territory of the Russian Federation. Of course, they all claim to offer quality equipment. But, before agreeing to the purchase, you should ask:

1. How is the winding on the pipe?
2. Is there a folding knot?
3. How much will consumables cost? For example, "knives" or a braided worm.

An automatic machine costs about 240,000 rubles, a semi-automatic machine will cost a little less. Another 5000 rubles will be spent on delivery.

REFERENCE: Given the high level of production of domestic equipment, it is recommended to purchase chain-link mesh machines in Russia, as it will be easier to maintain and purchase additional components in the future.

Purchase of raw materials

The following types of specially twisted steel wire are used as raw materials:

• galvanized;
• low carbon steel;
• stainless steel;
• with polymer coating.

Due to the fact that the finished product is used outdoors, it must be resistant to aggressive environments, so a material with corrosion protection is selected. The highest cost is obtained from stainless steel mesh, therefore, such products are purchased only on order and are used very rarely. The most optimal raw material option is galvanized steel wire. It is only necessary to purchase a wire galvanized precisely by the hot method, then the mesh will last a long time without losing its appearance. The new method of electrolytic galvanizing will not be able to guarantee anti-corrosion protection.

Any material for the production of chain-link mesh can be purchased at the metal-roll base in each city, so there will be no problems with the supply of raw materials.

To get started, it is enough to purchase 500 kg of wire in the amount of 20,000 rubles.

Formation of staff

The number of employees depends on the volume of production. For a beginner workshop for the production of chain-link mesh, 1-2 people are suitable with a salary in the form of a salary of 30,000 rubles per month for each. Since the production technology is simple, there are no special requirements for future workers, except for the desire to work and earn money.

Search for sales channels for products, advertising

The chain-link mesh is used in the following cases:

• arrangement of fences on garden plots, construction sites, enclosures;
• maintenance of soil, fastening of mine workings and transport belts;
• fencing of children's and sports grounds;
• production of cages for fur-bearing animals and birds;
• construction of partitions and screens on production areas;
• production of devices for loose materials;
• masonry walls of buildings and structures.

Potential buyers of finished products will be construction organizations, industrial and mining enterprises, landscape design studios, and individuals.

For the rapid and successful development of the sales system and the formation of a permanent customer base, it is necessary to work out a competent advertising campaign.

To promote your own chain-link mesh, the following marketing activities are suitable:

1. Creation and promotion of the site in search engines, directories, social networks.
2. Participation in the discussion of various issues at specialized forums with construction, industrial, design topics.
3. Sending emails with commercial offers to potential customers whose addresses can be found on the Internet.

This will be enough to quickly and inexpensively promote finished products in your region.

Financial calculations

Investments in the production of chain-link mesh

To start work on the production of chain-link mesh, the following investments will be needed:

Another 20,000 rubles should be allocated for the initial purchase of raw materials for the warehouse.

Monthly expenses

Monthly expenses include the following:

Monthly expenses, taking into account the purchase of goods, will amount to 406,000 rubles.

Income from the sale of finished products

Based on the fact that the demand will be approximately the same for all mesh sizes, the following sales are planned for one month:

The income of funds for the month will be about 723,900 rubles.

Profit and profitability of the business

With this level of sales, the net profit for the month will be 317,900 rubles, which corresponds to a 44% profitability.

The business plan for the production of chain-link mesh shows that the manufacturing technology is quite simple and can be done by anyone who wants to earn money, the risks of participating in this type of business are minimal. This type of activity is considered highly profitable; when building a good sales system, it gives excellent results and good profits.

Order a business plan

	Investments: Investments 450,000 - 600,000 ₽ URAL-STROY has been operating in the construction services market since 2008. The company is engaged in private housing construction. Ural-Stroy adheres to the "Quality and openness to the client" strategy, thanks to which it leads the cottage construction market. We build modern, comfortable turnkey houses. Our Goal: Become the developer - No. 1 in the Russian Federation in the segment of low-rise construction. Join us and together we can develop...
	Investments: Investments 2,300,000 - 3,500,000 rubles. Construction and production franchise "Stroymatik" invites you to engage in a truly innovative business. Earn money on the installation of reinforced concrete piles for low-rise construction using the unique compact piling rig "Stroymatik SGK-200". The idea of ​​forming a franchise was born in 2015, after the opening of the first branch in Cherepovets, the city where Stroymatik production is located on the local industrial site. The know-how of the company is a compact mini-plant, created on the basis of…
	Investments: Lump sum from 99,000 to 249,000 rubles + start-up costs from 30,000 rubles The unified service for ordering special equipment STROYTAXI was established in May 2013. At the time of its formation, it was the only dispatching service for the order of construction and special equipment that could be called a company, there were 3 people on the staff. For a year and a half of work in the market, we have experienced many ups and downs. Fortunately, there were more ups and downs on our way, so…
	Investments: From 1,000,000 rubles. up to 3,000,000 rubles New buildings are growing like mushrooms after rain, but how do you find out about the quality of housing, ceilings and quickly find the right layout for yourself? Of course, contact the Union of Developers, where the best real estate experts work and give free consultations to the population. About the company The Union of Developers is a kind of intermediary between end users and construction companies. The employees of this company make…
	Investments: from 250,000 rubles. The company "Stroymundir" is a manufacturer of high-quality overalls for various areas of production, security, industrial enterprises and recreation. As a manufacturer, Stroymundir can provide an unlimited range of finished products and a wide range of fabrics. And also to develop a design according to your desire and apply a logo of any complexity, which will give an advantage and individuality to your customer. Stroymundir uses unique technologies that strictly comply with the State Standards of the Russian Federation,…
	Investments: 500,000 - 1,000,000 rubles. Stroy Artel was founded in 2000. Its founders were enterprising and creatively thinking people with significant experience in various sectors of the economy. Even at the first stage of the company's development, a simple principle was adopted as a strategic setting - life means action. From the very beginning, the management of Stroy Artel was determined to act, and to act in a balanced, thoughtful way ...
	Investments: Investments from 460,000 rubles. Polyglots is a federal network of Children's Language Centers where children from 1 to 12 years old study foreign languages. The methodological center of the company has developed a unique program, thanks to which children begin to speak and think in a foreign language. We care about the comprehensive development of our little Polyglots, and offer additional classes in mathematics, creativity, literature, natural sciences, ...
	Investments: Investments 3 350 000 - 5 500 000 ₽ New Chicken is a new project of the BCA restaurant holding, which has the experience of opening more than 150 establishments in 8 countries of the world. The company is actively growing, developing new directions and knows what the consumer needs tomorrow. The company promotes a network of establishments on a franchising model. Description of the franchise The franchise package includes: production / trade / assembly equipment, furniture The New Chicken franchise has…
	Investments: Investments 6 500 000 - 10 000 000 ₽ The idea of ​​​​creating a wine bar with a quality assortment and pleasant prices was born by Evgenia Kachalova in 2013, after some time, which took the consciousness of a holistic concept, the search for a suitable place and team, the first Wine Bazaar appeared in Moscow! In May 2014, the Bazaar on Komsomolsky Prospekt opened its doors and immediately fell in love with the guest. Everyone came to…
	Investments: Investments 550,000 - 1,000,000 ₽ COMPANY DESCRIPTION The network of laser hair removal studios Laser Love was founded in 2018 in Novosibirsk. The group of companies has a distribution company responsible for the supply of equipment directly from the manufacturer. The company has all quality certificates for equipment - a certificate of conformity and the European Union. Own line of equipment under the DF-Laser brand guarantees the quality of the procedure from the first visit. Own marketing agency in…
	Investments: Investments 190,000 - 460,000 ₽
	Investments: Investments 1 490 000 - 3 490 000 ₽ Bestway Auto Service Network is a network of body and locksmith repair stations, which was founded in November 2014. Facts: For 4 years we have opened 14 stations in 8 regions of Russia - in Nizhny Novgorod, Kazan, Rostov-on-Don, Krasnodar, Ivanovo, Yaroslavl, Vladimir, Dzerzhinsk. In 2017, the group's cash turnover amounted to 211 million rubles. In 2018…